LilyGo-LoRa-Series

LilyGo LoRa Series

News

• Arduino IDE users need to configure the board to be used in the file in the sketch directory before using the example. The file contains the pin definitions of the board. If you do not select it, an error will occur during compilation.
• Arduino IDE 用户需要在 Sketch 目录下的 文件的最上方配置要使用的开发板，然后才能使用该示例。 文件包含开发板的引脚定义。如果您未选择该文件，编译时将出现错误。
• ⚠️ If using the PA version, please carefully read the PA power setting limits on the corresponding page. Incorrect output power settings may damage the PA.
• ⚠️ 如果使用PA版本，请仔细阅读对应页面的PA功率设置限制，错误的设置输出功率很有可能会损坏PA

1 Get Started

• T-Beam Quick Start
• T-Beam Supreme Quick Start
• T-Beam Supreme 144~148MHZ Quick Start
• T-Beam BPF Quick Start
• T-Beam 1W SX1262 Quick Start
• T-Beam 1W LR1121 Quick Start
• T-Beam 1W LR2021 Quick Start
• LoRa32 V1.3 Quick Start
• LoRa32 V1.6.1 Quick Start
• LoRa32 TCXO Quick Start
• T3-C6 Quick Start
• T3-S3-SX1262 Quick Start
• T3-S3-LR1121 Quick Start
• T3-S3-LR1121 PA Version Quick Start
• T3-S3-SX1280 Quick Start
• T3-S3-SX1280PA Quick Start
• T3-S3-SX1276 Quick Start
• T3-S3-SX1278 Quick Start

2 Example description

…

3 Use reference

4 TTN

To access TTN (The Things Network), please refer to LilyGo_LoRa_Series_Quick_Start

5 Factory Firmware

See firmware directory