限制网络连接 [Linux/Mac OS X]
Inspired by tylertreat/Comcast, the connectivity setting in the WPTAgent and sltc.
Throttle uses pfctl on Mac and tc on Linux to simulate different network speeds. On Linux you also need ip for Throttle to work (install using sudo apt-get install -y net-tools).
You can set the download/upload speed and/or RTT. Upload/download is in kbit/s and RTT in ms.
Use with latest NodeJS LTS.
npm install @sitespeed.io/throttle -gOn OSX, add these lines to /etc/pf.conf if they don't exist, to prevent the pfctl: Syntax error in config file: pf rules not loaded error when you try to run throttle
pf_enable="YES"
pflog_enable="YES"On Linux you need to make sure ip and route is installed (install using sudo apt-get install -y net-tools).
Here is an example for running with 3G connectivity. Remember: Throttle will use sudo so your user will need sudo rights.
throttle --up 330 --down 780 --rtt 200To make it easier we have pre made profiles, check them out by throttle --help:
…You can start throttle with one of the premade profiles:
throttle --profile 3gslowor even simpler
throttle 3gslowBy default there's no packet loss. That is by design: If you want to use Throttle and have the same network speed, packet loss is no good. However if you want to simalate a really crappy network you probably want to add packet loss. You do that with the --packetLoss option. You set the packet loss in percent.
throttle --profile 3gslow --packetLoss 5You can also use a configuration file with your settings. Use --config to map your config file to throttle.
config.json
{
"up": 330 ,
"down": 200,
"rtt": 1000
}And then run:
throttle --config config.jsonStopping is as easy as giving the parameter stop to throttle.
throttle --stopor
throttle stopThis is useful if you test a local web server or run WebPageReplay and want to add some latency to your tests.
throttle --rtt 200 --localhostthrottle --stop --localhostimport { start, stop } from '@sitespeed.io/throttle'
// Returns a promise
start({up: 360, down: 780, rtt: 200}).then(() => ...or
import { start, stop } from '@sitespeed.io/throttle'
const options = {up: 360, down: 780, rtt: 200};
await start(options);
// Do your thing and then stop
await stop();You can log all the commands that sets up the throttling by setting LOG_THROTTLE=true.
LOG_THROTTLE=true throttle 3gslowor
throttle 3gslow --logMake sure to run sudo modprobe ifb numifbs=1 before you start the container.
And then when you actually start your Docker container, give it the right privileges with --cap-add=NET_ADMIN.
暂无开放 Issues,或尚未同步最近议题。