用于从 SDR 中接收数据的 rx_fm、rx_power 和 rx_sdr 工具,基于 librtlsdr 中的 rtl_fm、rtl_power 和 rtl_sdr,但使用 SoapySDR 的供应商中立 SDR。
用于从 SDR 中接收数据的 rx_fm、rx_power 和 rx_sdr 工具,基于 librtlsdr 中的 rtl_fm、rtl_power 和 rtl_sdr,但使用 SoapySDR 的供应商中立 SDR。
rx_fm, rx_power, and rx_sdr tools for receiving data from SDRs,
based on rtl_fm, rtl_power, and rtl_sdr from librtlsdr,
but using the SoapySDR vendor-neutral SDR support library instead, intended
to support a wider range of devices than RTL-SDR.
Install SoapySDR, then run:
cmake .
makeAfter building, these binaries should then be available at the root directory:
rx_fm (based on rtl_fm): demodulator for FM and other modes, see rtl_fm guide
rx_power (based on rtl_power): FFT logger, see rtl_power
rx_sdr (based on rtl_sdr): emits raw I/Q data
Tools from librtlsdr not included in this repository:
rtl_eeprom, rtl_test, rtl_ir: specific to RTL-SDR devicesrtl_tcp, rtl_rpcd: remote networking, see SoapyRemote insteadrtl_adsb: see dump1090Currently tested with an RTL-SDR dongle, a HackRF One, and bladeRF x40, primarily using rx_fm,
but supporting all devices supported by SoapySDR is the goal. Experimental, use at your own risk, but bug
reports and patches are welcome.
See ChangeLog.md
暂无开放 Issues,或尚未同步最近议题。