quip-validator

Quip Network node

Quip Network solochain node (quip-network-node).

Chain specs

Omit --chain to join the live public Quip Testnet (EIP-155 20033). --chain=local is a disposable Alice-and-Bob chain. It is not the public testnet.

Flag	Preset	Network	EIP-155
(omit --chain)	quip-testnet	live public testnet	20033
--chain=quip-testnet	quip-testnet	live public testnet	20033
--dev or --chain=dev	Development	Alice-only local	1337
--chain=local	Local Testnet	Alice and Bob local	1337
--chain=local3	Local Testnet (3 Validators)	Alice, Bob, and Charlie local	1337

Aliases for the public testnet: quip_testnet, testnet. A path argument loads that JSON file and uses the chain ID in its genesis.

Runtime 117 is the H2/H4 chain-wipe relaunch. It starts from fresh genesis and is not an in-place upgrade of the earlier H1/H3 network. Operators must use a fresh chain database, re-insert the H4 BABE and H2 GRANDPA keys, and sync from the new genesis; old signed extrinsics are incompatible (transaction_version is 7).

Getting Started

Depending on your operating system and Rust version, there might be additional packages required to compile this template. Check the Install instructions for your platform for the most common dependencies. Alternatively, you can use one of the alternative installation options.

Fetch solochain template code:

git clone https://github.com/paritytech/polkadot-sdk-solochain-template.git solochain-template

cd solochain-template

Build

Use the following command to build the node without launching it:

cargo build --release

Join the live public testnet

Omit --chain to select quip-testnet (EIP-155 20033).

# Live public testnet (EIP-155 20033). Default if you omit --chain.
./target/release/quip-network-node

Embedded Docs

After you build the project, you can use the following command to explore its parameters and subcommands:

./target/release/solochain-template-node -h

You can generate and view the Rust Docs for this template with this command:

cargo +nightly doc --open

Single-Node Development Chain

The following command starts a single-node development chain that does not persist state. --dev is the Alice-only local preset (EIP-155 1337), not the public testnet.

# Alice-only local chain (EIP-155 1337)
./target/release/solochain-template-node --dev

To purge the development chain's state, run the following command:

# Alice-only local chain (EIP-155 1337)
./target/release/solochain-template-node purge-chain --dev

To start the development chain with detailed logging, run the following command:

# Alice-only local chain (EIP-155 1337)
RUST_BACKTRACE=1 ./target/release/solochain-template-node -ldebug --dev

Development chains (--dev / --chain=dev):

• Maintain state in a tmp folder while the node is running.
• Use the Alice account as the sole validator authority.
• Use the Alice account as the default sudo account.
• Are preconfigured with a genesis state (/node/src/chain_spec.rs) that includes several pre-funded development accounts.
• Use EIP-155 chain ID 1337.

To persist chain state between runs, specify a base path by running a command similar to the following:

// Create a folder to use as the db base path
$ mkdir my-chain-state

// Alice-only local chain (EIP-155 1337)
$ ./target/release/solochain-template-node --dev --base-path ./my-chain-state/

// Check the folder structure created inside the base path after running the chain
$ ls ./my-chain-state
chains
$ ls ./my-chain-state/chains/
dev
$ ls ./my-chain-state/chains/dev
db keystore network

Connect with Polkadot-JS Apps Front-End

After you start the node template locally, you can interact with it using the hosted version of the Polkadot/Substrate Portal front-end by connecting to the local node endpoint. A hosted version is also available on IPFS. You can also find the source code and instructions for hosting your own instance in the polkadot-js/apps repository.

Quip uses hybrid BABE and GRANDPA consensus keys. Polkadot.js Apps does not require custom types for Quip anymore; for usage notes, see docs/polkadotjs/README.md.

Multi-Node Local Testnet

A scripted three-validator local network is available two ways. Both use --chain=local3 (EIP-155 1337). This is not the public testnet.

• Native build: scripts/start-local3.sh builds the debug binary and starts three validators (Alice/Bob/Charlie) against the embedded local3 chain spec.
• Docker: docker compose up --build starts the same three-validator topology in containers. See the Docker section below.

Both paths use the same hardcoded libp2p node-keys and bootnode peer ID, so they're interchangeable for development.

For background on multi-node consensus, see Simulate a network.

Template Structure

A Substrate project such as this consists of a number of components that are spread across a few directories.

Node

A blockchain node is an application that allows users to participate in a blockchain network. Substrate-based blockchain nodes expose a number of capabilities:

• Networking: Substrate nodes use the libp2p networking stack to allow the nodes in the network to communicate with one another.
• Consensus: Blockchains must have a way to come to consensus on the state of the network. Substrate makes it possible to supply custom consensus engines and also ships with several consensus mechanisms that have been built on top of Web3 Foundation research.
• RPC Server: A remote procedure call (RPC) server is used to interact with Substrate nodes.

There are several files in the node directory. Take special note of the following:

• chain_spec.rs: A chain specification is a source code file that defines a Substrate chain's initial (genesis) state. Chain specifications are useful for development and testing, and critical when architecting the launch of a production chain. Take note of the development_config and testnet_genesis functions. These functions are used to define the genesis state for the local development chain configuration. These functions identify some well-known accounts and use them to configure the blockchain's initial state.
• service.rs: This file defines the node implementation. Take note of the libraries that this file imports and the names of the functions it invokes. In particular, there are references to consensus-related topics, such as the block finalization and forks and other consensus mechanisms such as BABE for block authoring and GRANDPA for finality.

Runtime

In Substrate, the terms "runtime" and "state transition function" are analogous. Both terms refer to the core logic of the blockchain that is responsible for validating blocks and executing the state changes they define. The Substrate project in this repository uses FRAME to construct a blockchain runtime. FRAME allows runtime developers to declare domain-specific logic in modules called "pallets". At the heart of FRAME is a helpful macro language that makes it easy to create pallets and flexibly compose them to create blockchains that can address a variety of needs.

Review the FRAME runtime implementation included in this template and note the following:

• This file configures several pallets to include in the runtime. Each pallet configuration is defined by a code block that begins with impl $PALLET_NAME::Config for Runtime.
• The pallets are composed into a single runtime by way of the #[runtime] macro, which is part of the core FRAME pallet library.

Pallets

The runtime in this project is constructed using many FRAME pallets that ship with the Substrate repository and a template pallet that is defined in the pallets directory.

A FRAME pallet is comprised of a number of blockchain primitives, including:

• Storage: FRAME defines a rich set of powerful storage abstractions that makes it easy to use Substrate's efficient key-value database to manage the evolving state of a blockchain.
• Dispatchables: FRAME pallets define special types of functions that can be invoked (dispatched) from outside of the runtime in order to update its state.
• Events: Substrate uses events to notify users of significant state changes.
• Errors: When a dispatchable fails, it returns an error.

Each pallet has its own Config trait which serves as a configuration interface to generically define the types and parameters it depends on.

Alternatives Installations

Instead of installing dependencies and building this source directly, consider the following alternatives.

Nix

Install nix and nix-direnv for a fully plug-and-play experience for setting up the development environment. To get all the correct dependencies, activate direnv direnv allow.

Docker

A multi-stage Dockerfile builds the quip-network-node binary on top of debian:bookworm-slim (~80 MB runtime image). The image exposes the binary directly as ENTRYPOINT, so any Substrate CLI flag works at docker run time.

Build

docker build -t quip-network-node:local .

The first build compiles the full workspace and takes a while. BuildKit cache mounts (declared in the Dockerfile) keep the cargo registry and target directory between local rebuilds.

Pre-built images

Every push to main and every git tag publishes an image to the project's GitLab Container Registry, so you don't have to build locally:

docker pull registry.gitlab.com/quip.network/quip-validator/quip-network-node:latest

Tag scheme:

• :latest — tip of main. Floating, advances on every merge.
• :sha-<short> — pinned to a specific commit on main or to a tagged release.
• :<git-tag> — pinned to a release tag (e.g. :v0.1.0).

Run as a validator

# Three-validator local chain (EIP-155 1337). Not the public testnet.
docker run --rm -v quip-data:/data -p 9944:9944 -p 30333:30333 \
  quip-network-node:local \
  --chain=local3 --base-path=/data \
  --validator --alice \
  --unsafe-rpc-external --rpc-cors=all

--unsafe-rpc-external is required because Substrate refuses to combine --rpc-external with --validator by default (a safety guard against exposing a validator's RPC to the public internet). For local development the unsafe flag is fine; for production validators