百科.dev
全部条目在线工具AI 编程趋势榜开源项目技术资讯提交条目
登录
< 返回工具列表
U

unitemp-flipperzero

> 编程语言
开源

Flipper Zero 应用可读取 DHT11/22、DS18B20、BMP280、HTU21 等温度、湿度和压力传感器的数据

351 stars0 点赞0 次浏览
访问官网GitHub

工具介绍

Flipper Zero 应用可读取 DHT11/22、DS18B20、BMP280、HTU21 等温度、湿度和压力传感器的数据

️ Unitemp - Universal temperature sensor reader

An app for Flipper Zero that turns your gadget into a multifunctional environmental sensor. It can read data from various sensors you connect to Flipper Zero, for example, temperature, humidity, atmospheric pressure, and even CO₂ levels. You can assess the climate at home or in the office, or simply use Flipper Zero as a portable thermometer.

Features

  • Real-time display of temperature, humidity, pressure, and CO₂ concentration.
  • Heat index and dew point temperature display.
  • Environmental quality analysis and visual and audible indicators (good , normal , poor , dangerous )
  • Automatic and manual selection of temperature (degrees Celsius/Fahrenheit) and pressure (mmHg/inHg/kPa/hPa) units.
  • Support for a wide range of digital sensors with I²C, SPI, 1-Wire, and Single Wire connectivity.
  • User-friendly and intuitive interface.

Installation

Just install from the application catalog https://lab.flipper.net/apps/unitemp or the mobile application

..or use the ufbt to compile and install directly to Flipper.

bash
git clone https://github.com/quen0n/unitemp-flipperzero.git
cd unitemp-flipperzero
git checkout -b master
ufbt update
ufbt && ufbt launch 

Connecting sensors

To connect, you will need a supported sensor and Dupont male-female wires. The connection method depends on the interface.

Single Wire (DHT11 and etc)

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
Data any free digital port

1-Wire (DS18B20 and etc)

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
Data any free digital port

Pin 17 (1W) is preferred. You can also connect multiple sensors in parallel using the same circuit.

SPI (MAX6675, MAX31725 and etc)

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
MOSI (if any) 2 (A7)
MISO (DO/SO) 3 (A6)
SCK (CLK) 5 (B3)
CS (SS) any free digital port

I²C

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
SDA 15 (C1)
SCL 16 (C2)

Need help? Discussions?

Join the discussion, ask a question, or just send a photo of the flipper with sensors to Discord. Invite link

Contributing

You can write a driver for your favorite sensor and submit it in pull requests. This is encouraged.

Gratitudes

  • Special thanks xMasterX, vladin79, divinebird, jamisonderek, kaklik
  • Svaarich for the UI design
  • Unleashed firmware community for sensors testing and feedbacks
  • ...and everyone who helped with development and testing

List of supported sensors

| Model | Temperature range (accuracy, step)| Humidity range (accuracy, step)| Extra range

(accuracy, step)| Interface |Image and link | |:--------------------:|:-------------------------------:|:------------------------:|:---------------------------:|:-------------:|:--------------:| |AHT10 |-40...85°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.024%) | |I²C|| |AHT20 |-40...85°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.024%) | |I²C|| |AM2320 |-40...80°C (±0.5°C, 0.1°C) |0...100% (±3%, 0.1%) | |Single Wire/I²C|| |BME280 |-40...85°C (±1.0°C, 0.01°C) |0...100% (±3%, 0.008%) |300...1100 hPa (±1.0 hPa, 0.0016 hPa) |I²C|| |BME680 |-40...85°C (±0.5°C, 0.01°C) |0...100% (±3%, 0.008%) |300...1100 hPa (±0.6h Pa, 0.18 hPa) |I²C|| |BMP180 |-40...85°C (±0.5°C, 0.01°C) | |300...1100 hPa (±1.0 hPa, 0.01 hPa) |I²C|| |BMP280 |-40...85°C (±1.0°C, 0.01°C) | |300...1100 hPa (±1.0 hPa, 0.0016 hPa) |I²C|| |DHT11 (AOSONG) | 0...50°C (±2°C, 1.0°C) | 20...90% (±5%, 1.0%) | |Single Wire|| |DHT11 (ASAIR) | -20...60°C (±2°C, 0.1°C) | 5...95% (±5%, 1.0%) | |Single Wire|| |DHT12 | -20...60°C (±0.5°C, 0.1°C) | 20...90% (±5%, 0.1%) | |Single Wire|| |DHT20/AM2108 |-40...80°C (±0.5°C, 0.1°C) |0...100% (±3%, 0.1%) | |I²C|| |DHT21/AM2301 |-40...80°C (±1.0°C, 0.1°C) |0...100% (±3%, 0.1%) | |Single Wire|| |DHT22/AM2302 |-40...80°C (±0.5°C, 0.1°C) |0...100% (±2%, 0.1%) | |Single Wire|| |DS18B20 |-55...125°C (±0.5°C, 0.0625°C)| | |1-Wire|| |DS18S20 (DS1820) |-55...125°C (±0.5°C, 0.5°C) | | |1-Wire|| |DS1822 |-55...125°C (±2.0°C, 0.0625°C)| | |1-Wire|| |HDC1080 |-40...125°C (±0.2°C, 0.1°C) |0...100% (±2%, 0.1%) | |I²C|| |HDC2080 |-40...125°C (±0.2°C, 0.1°C) |0...100% (±2%, 0.1%) | |I²C|| |HTU21D(F) |-40...125°C (±0.3°C, 0.1°C) |0...100% (±2%, 0.04%) | |I²C|| |LM75 |-55...125°C (±2.0°C, 0.1°C) | | |I²C|| |MAX31725 |-40...105°C (±0.5°C, 0.004°C) | | |I²C|| |MAX31855 |-200...1800°C (±2.0°C, 0.25°C)| | |SPI|| |MAX6675 |0...1024°C (±9.0°C, 0.25°C) | | |SPI|| |SCD30 |0...50°C (±0.4°C, 0.01°C) |0...100% (±3%, 0.004%) |0...40000 ppm CO₂ (±30 ppm, 1.0 ppm) |I²C|| |SCD40 |-10...60°C (±0.8°C, 0.003°C) |0...100% (±6%, 0.002%) |400...2000 ppm CO₂ (±50 ppm, 1.0 ppm)|I²C|| |SCD41 |-10...60°C (±0.8°C, 0.003°C) |0...100% (±6%, 0.00%2) |400...5000 ppm CO₂ (±40 ppm, 1.0 ppm)|I²C|| |SHT20 |-40...125°C (±0.3°C, 0.01°C) |0...100% (±3%, 0.04%) | |I²C|| |SHT21 |-40...125°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.04%) | |I²C|| |SHT25 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.04%)| |I²C|| |SHT30/GXHT30 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±2%, 0.01%) | |I²C|| |SHT31/GXHT31 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±2%, 0.01%) | |I²C|| |SHT35/GXHT35 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.5%, 0.01%)| |I²C|| |SHT40 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.01%)| |I²C|| |SHT41 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.01%)| |I²C|| |SHT43 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.01%)| |I²C|| |SHT45 |-40...125°C (±0.1°C, 0.01°C) |0...100% (±1%, 0.01%) | |I²C|| |SHTC3 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±2%, 0.01%) | |I²C|| |Si7021 |-40...125°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.025%) | |I²C|| |TMP102 |-40...125°C (±0.5°C, 0.06°C) | | |I²C||

A comprehensive overview of the sensors can be found

Issues· 0 开放

查看全部 Issues在 GitHub 打开

暂无开放 Issues,或尚未同步最近议题。

> 标签

Caht10am2320bme280bmp180

暂无评论,来聊聊你的看法吧

> 工具信息

发布日期2026年8月1日
最后更新2026年9月17日
分类编程语言
定价开源

> 相关工具

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言