百科.dev
全部条目在线工具AI 编程趋势榜开源项目技术资讯提交条目
登录
< 返回工具列表
L

lk2nd

> 编程语言
开源

针对高通 MSM8916/MSM8226/MSM8974/… 设备的自定义引导加载程序

599 stars0 点赞1 次浏览
访问官网GitHub

工具介绍

针对高通 MSM8916/MSM8226/MSM8974/… 设备的自定义引导加载程序

lk2nd

lk2nd is a custom bootloader for many different devices based on Qualcomm system-on-chips (SoCs), including smartphones, tablets, smartwatches and a few single board computers (SBCs). It simplifies booting standard operating systems by providing:

  • A unified boot and flashing interface (Android Fastboot), independent of device-specific modifications made to the boot chain (e.g. the proprietary flashing interface on Samsung devices)
  • Automatic device and hardware detection (e.g. display panels, batteries, ...)
  • Additional bootloader features (e.g. file system boot, booting from SD card)
  • Additional firmware features (e.g. booting secondary CPU cores if the firmware lacks PSCI support)
  • Workarounds for various device-specific issues (e.g. USB on some Samsung devices, modem on Motorola smartphones, ...)
  • Various debugging commands that allow better understanding of the hardware for research and development purposes

There are two different configurations:

  • lk2nd: "secondary" bootloader intended for devices where existing firmware cannot be replaced easily (most smartphones and tablets). In this configuration, lk2nd does not replace the stock bootloader. Instead, it is packed into an Android boot image, which is then loaded by the stock bootloader just like the original Android image. The real operating system can be placed in the boot partition with 512 KiB offset or stored in a ext2 file system. It does not have to be Android or even Linux, any kind of kernel can be packed into an Android boot image.

  • lk1st: primary bootloader intended for single-board computers (SBCs) and expert users. In this case, it is the "first" bootloader responsible for loading the main operating system.

This repository is a fork of the original open-source bootloader from Qualcomm, which is a heavily modified version of the Little Kernel Embedded Operating System.

Supported SoCs and devices

lk2nd supports a significant amount of devices. See devices.md for a comprehensive list.

Installation

  1. Download lk2nd.img (available in Releases)
  2. Flash lk2nd.img using the stock flashing interface:
    • Fastboot: fastboot flash boot lk2nd.img
    • Samsung: heimdall flash --BOOT lk2nd.img

If you get fastboot: error: Couldn't parse partition size '0x' try one of the following workarounds:

  • fastboot flash:raw boot lk2nd.img
  • fastboot boot lk2nd.img, then fastboot flash lk2nd lk2nd.img

Or, flash lk2nd.img using EDL: edl w boot lk2nd.img

Usage

lk2nd provides the standard Android fastboot protocol for flashing/booting Android boot images.

Press Volume Down while booting to enter Fastboot mode. Press Volume Up while booting to boot into Recovery mode.

[!TIP] If your stock bootloader uses the same key combinations, you need to wait a bit before pressing the volume keys. Usually, waiting until the screen turns on and/or the device vibrates should be enough to make the stock bootloader ignore the keys.

fastboot flash lk2nd lk2nd.img can be used to update lk2nd directly from its fastboot interface.

[!IMPORTANT] fastboot flash boot boot.img will flash the actual boot image with 512 KiB offset into the boot partition. This is done to avoid replacing lk2nd (since it is also booted from the boot partition).

Other fastboot commands work normally.

Troubleshooting

If the device shows up via fastboot you can get a log file from lk2nd using fastboot oem log && fastboot get_staged , where `` is either some text file to write to (e.g. output.txt) or /dev/stdout to write the log to standard output.

Building

Generally, this should be enough to build lk2nd:

$ make TOOLCHAIN_PREFIX=arm-none-eabi- lk2nd-msmXXXX

See building.md for more info.

Contact

Ask on #lk2nd:postmarketos.org (#lk2nd on irc.oftc.net).

Issues· 0 开放

查看全部 Issues在 GitHub 打开

暂无开放 Issues,或尚未同步最近议题。

> 标签

Cbootloaderfirmwarelk1stlk2nd

暂无评论,来聊聊你的看法吧

> 工具信息

发布日期2026年8月1日
最后更新2026年9月17日
分类编程语言
定价开源

> 相关工具

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言