因为"Docker"的ps很烦人,不符合我的显示器/平面宽度
docker psA replacement for the default docker-ps that tries really hard to fit within your terminal width.
By default, my docker ps output is really wide and every line wraps around into three.
This (obviously) breaks the tabular display and makes everything chaotic.
(This gets especially bad if one container has multiple port mappings, and they are all displayed in a single row)
It doesn't look like we'll get improved output in the foreseeable future (see moby#7477), so I decided to make my own drop-in replacement.
--sort argument--watch argumentMore Changes from default docker-ps:
{{.ImageName}, {{.ImageTag}, {{.Tag}, {{.ImageRegistry}, {{.Registry}, {{.ShortCommand}, {{.LabelKeys}, {{.IP}, {{.User} {{.User}} column shows the user a container runs as (Config.User). Because this is not part of the
cheaper container-list endpoint, dops only queries the (slower) container-inspect endpoint when this column is used../dops --help)dops command everywhere):sudo wget "https://github.com/Mikescher/better-docker-ps/releases/latest/download/dops_linux-amd64-static" -O "/usr/local/bin/dops" && sudo chmod +x "/usr/local/bin/dops"dops into your PATH)dops into your PATH)brew tap mikescher/tap && brew install dopsdops (see section below)If you want to build dops from source, you need to have Go installed.
git clone https://github.com/Mikescher/better-docker-ps.git
cd better-docker-ps
make build
mv _out/dops "$HOME/.local/bin/"All (default) columns visible
Output on a medium sized terminal
Output on a small terminal
You can fully replace docker ps by creating a shell function in your .bashrc / .zshrc...
docker() {
case $1 in
ps)
shift
command dops "$@"
;;
*)
command docker "$@";;
esac
}This will alias every call to docker ps ... with dops ... (be sure to have the dops binary in your PATH).
If you are using the fish-shell you have to create a (similar) function:
function docker
if test -n "$argv[1]"
switch $argv[1]
case ps
dops $argv[2..-1]
case '*'
command docker $argv[1..-1]
end
end
endBy default dops tries to be "intelligent" and find the best output format for your terminal width. The current output formats (= table columns) are defined in the options.go. The first format that fits in your terminal width is used.
But you can also override it by supplying a --format parameter. If you supply more than one --format parameter the first one that fits your terminal is used (same logic as with the default ones...)
Normally only simple columns aka {{.Status}} are supported.
But you can also use the full golang template syntax (e.g. {{ printf "%.15s" .Command }}).
In this case it can be useful to specify the column header by prefixing it with a colon (SHORTENED NAME:{{ printf "%.10s" (join .Names ";") }})
The following functions are defined in these templates (plus the default go functions):
join: strings.Joinarray_last: v[-1]array_slice: v[a..b] in_array: v1.contains(v2)json: json.Marshal(v)json_indent: json.MarshalIndent(v, "", " ")json_pretty: json.Indent(v, "", " ")coalesce: v1 ?? v2to_string: fmt.Sprintf("%v", v)deref: *vnow: time.Now()uniqid: UUIDExamples:
$ ./dops --format "table {{.ID}}"
$ ./dops --format "table {{.ID}}\\t{{.Names}}\\t{{.State}}"
$ ./dops --format "idlist"
$ ./dops --format "table {{.ID}}\\t{{.Names}}\\t{{.State}}" --format "table {{.ID}}\\t{{.Names}}" --format "table {{.ID}}"
$ ./dops --format "ID: {{.ID}}; Name: {{.Names}}"
$ ./dops -aq
$ ./dops --sort "IP" --sort-direction "ASC"
$ ./dops --format "table {{.ID}}\\tCMD:{{ printf \"%.15s\" .Command }}"
$ ./dops --format "table {{.ID}}\\tNAME:{{ printf \"%.10s\" (join .Names \";\") }}"
You can also configure some/most of the options via a configuration file.
Place a TOML formatted file in $HOME/.config/dops.conf / $XDG_CONFIG_HOME/dops.conf.
( ~/Library/Application Support/dops.conf is also supported under macOS )
The first existing file from the following locations is used:
$XDG_CONFIG_HOME/dops.conf (or the platform default, e.g. ~/Library/Application Support/dops.conf under macOS)~/.config/dops.confThe following keys are supported:
Example:
verbose = 0
timezone = "Europe/Berlin"
format = [
"table {{.ID}}\t{{.Names}}\t{{.State}}\t{{.Status}}",
"table {{.ID}}\t{{.Names}}\t{{.State}}",
"table {{.ID}}\t{{.Names}}",
"table {{.ID}}",
]
header = "simple"Output of ./dops --help:
better-docker-ps
Usage:
dops [OPTIONS] List docker container
Options (default):
-h, --help Show this screen.
--version Show version.
--all , -a Show all containers (default shows just running)
--filter , -f Filter output based on conditions provided
--search , -g Filter output by substring match across all visible columns (case-insensitive)
--format Pretty-print containers using a Go template
--last , -n Show n last created containers (includes all states)
--latest , -l Show the latest created container (includes all states)
--no-trunc Don't truncate output (eg ContainerIDs, Sha256 Image references, commandline)
--quiet , -q Only display container IDs
--size , -s Display total file sizes
Options (extra | do not exist in `docker ps`):
--silent Do not print any output
--timezone Specify the timezone for date outputs
--color Enable/Disable terminal color output
--no-color Disable terminal color output
--socket Specify the docker socket location (Default: `auto` - which calls the docker cli to determine the socket)
--timeformat Specify the datetime output format (golang syntax)
--no-header Do not print the table header
--simple-header Do not print the lines under the header
--format You can specify multiple formats and the first one that fits your terminal widt will be used
--sort Sort output by a specific column, use the same identifier as in --format, only useful together with table formats
--sort-direction The sort direction, only useful in combination with --sort
--watch , -w Automatically refresh output periodically (interval is optional, default: 2s)
Available --format keys (default):
{{.ID}} Container ID
{{.Image}} Image ID
{{.Command}} Quoted command
{{.CreatedAt}} Time when the container was created.
{{.RunningFor}} Elapsed time since the container was started.
{{.Ports}} Published ports. ([!] differs from docker CLI, these are only the published ports)
{{.State}} Container status
{{.Status}} Container status with details
{{.Size}} Container disk size.
{{.Names}} Container names.
{{.Labels}} All labels assigned to the container.
{{.Label}} [!] Unsupported
{{.Mounts}} Names of the volumes mounted in this container.
{{.Networks}} Names of the networks attached to this container.
Available --format keys (extra | do not exist in `docker ps`):
{{.ImageName}} Image ID (without tag and registry)
{{.ImageTag}}, {{.Tag}} Image Tag
{{.ImageRegistry}}, {{.Registry}} Image Registry
{{.ShortCommand}} Command without arguments
{{.LabelKeys}} All labels assigned to the container (keys only)
{{.ShortPublishedPorts}} Published ports, shorter output than {{.Ports}}
{{.LongPublishedPorts}} Published ports, full output with IP
{{.ExposedPorts}} Exposed ports
{{.PublishedPorts}} Published ports
{{.NotPublishedPorts}} Exposed but not published ports
{{.PublicPorts}} Only the public part of published ports
{{.IP}} Internal IP Address
{{.User}} User the container runs as (queried via container-inspect)暂无开放 Issues,或尚未同步最近议题。