解锁您的 Sony 相机的设置
An app to unlock settings on your Sony camera.
Please read this section for up-to-date information on installing the app.
This app should be compatible with all Sony cameras supporting PlayMemories Camera Apps (PMCA). See here for a full list.
This is not an official Sony application. All information has been found through reverse engineering. Even though everything worked fine for our developers, it could cause harm to your hardware. If you break your camera, you get to keep both pieces. We won't take any responsibility.
After installation, you should find the app in the "Application List" on your camera.
There are several different tabs:
Remove the 30 minute recording limit and enjoy (almost) unlimited video recording.
Additionally, remove the 5 minute 4K recording limit on the RX100M4.
Is your camera locked to Japanese? Is it set to the wrong region? Unlock all 30+ languages.
Is your camera locked to NTSC? Enable the PAL / NTSC selector.
Does your camera show you the NTSC nag screen on every startup? Disable the PAL / NTSC selector to get rid of the nag screen.
Use this option only if you're asked to do so. Some of the above settings may fail because your settings file is locked. Disable the protection here. In practice, it should only matter to this app if your settings are protected or not. Otherwise, this won't change anything. We still recommend re-enabling protection after you're done tweaking your settings.
Check the "Enable Wifi" checkbox to permanently connect the camera to your wifi access point.
Don't forget to increase the "Power save start time" in the menu, or the camera may turn off automatically after a few minutes.
Once wifi is enabled, you can run and connect to the following daemons:
To get a root shell on your camera, check the "Enable Telnet" checkbox. This starts a telnet daemon listening on port 23. Connect to it via wifi.
A few special commands you can run:
To run an Android shellandroid_console.sh
On Android 2:
dd if=/dev/nflasha of=/android/mnt/sdcard/DUMP.DAT bs=1M
On Android 4:
dd if=/dev/nflasha of=/android/storage/sdcard0/DUMP.DAT bs=1M
This operation will take some time (it copies about 500MB). Use fwtool.py to unpack the dump file.
To install and debug Android apps from your computer, check the "Enable ADB" checkbox. This starts an ADB daemon listening on port 5555. Connect to it via wifi:
adb connect <your camera's ip>
nex-hack managed to decrypt firmware updates (see fwtool.py for a more recent unpacker). The PMCA-RE project reverse engineered how apps are installed. This allows us to run custom code. With the knowledge from the firmware, we found out how settings are stored on the camera (hint: in a file called Backup.bin). We can now change these settings directly, also the ones locked by Sony.
First, thanks for testing. If you encounter a bug, please open an issue!
You can uninstall it normally with the "Application Management" app. The modified settings are preserved even if you remove the app.
Some settings might be removed, others will be permanent. We still have to investigate a bit more to find out which features are reset and how. In the worst case, you can reinstall the app (all apps are removed in a factory reset) and apply the settings again.
See above.
Depending on your camera, tweaks may be applied using a method based on the firmware update process: More information
Keep in mind that this app can only change settings that are already there and just hidden by Sony. However, there are still about 15 000 entries in the settings file. So finding out what a particular setting does is quite an effort. But if you have ideas, feel free to open an issue!
暂无开放 Issues，或尚未同步最近议题。