百科.dev
全部条目在线工具AI 编程趋势榜开源项目技术资讯提交条目
登录
< 返回工具列表
T

tensor_stream

> 编程语言
开源

这是一个从头开始的、独立的 TensorFlow 重新实现,适用于 ruby。包含纯 ruby 和 OpenCL 指令码评估器。

506 stars0 点赞3 次浏览
访问官网GitHub

工具介绍

这是一个从头开始的、独立的 TensorFlow 重新实现,适用于 ruby。包含纯 ruby 和 OpenCL 指令码评估器。

TensorStream

TensorStream is an opensource framework for machine learning for ruby, its goal is to allow machine learning models to be easily built and run them in various hardware like GPUs and CPUs. It is heavily based on TensorFlow with the goal of being able to easily port its higher level libraries and model examples. As such it is also based on data flow graphs wherein you define computations and data flows between those computations in order to achieve the desired output.

TensorStream is designed to support various backends with a Pure Ruby and OpenCL implementation. These implementations are designed to work together, you can perform training on an OpenCL implementation (where you have a GPU) and then run the resulting trained model on a Pure Ruby implementation where you can deploy anywhere that you can run ruby on. TensorStream has been tested to run on most ruby implementations like MRI, JRuby and TruffleRuby.

Goals & Features

  • Easy to use - Improve model readability
  • Replicates most of the commonly used low-level tensorflow ops (tf.add, tf.constant, tf.placeholder, tf.matmul, tf.sin etc...)
  • Supports auto-differentiation using formal derivation
  • Extensible - use your own opcode evaluator (OpenCL and Pure ruby currently supported)
  • wide support - Run on most ruby implementations as well as hardware acceleration on OpenCL supported hardware

Compatibility

TensorStream comes with a pure ruby and OpenCL implementation out of the box. The pure ruby implementation is known to work with most ruby implementations including TruffleRuby, JRuby as well as jit enabled versions of mri (ruby-2.6.0).

OpenCL is supported only on mri implementations of ruby. This can be enabled by adding OpenCL evaluator gem (Make sure you have OpenCL drivers installed correctly on your system):

gemfile
gem 'tensor_stream-opencl'

and then (without bundler)

ruby
require 'tensor_stream/opencl'

OpenCL is basically a requirement for deep learning and image processing tasks as the ruby implementation is too slow even with jit speedups using latest ruby implementations.

OpenCL kernels used by tensorstream can be found at tensor_stream/lib/evaluator/opencl/kernels. These are non specific and should work with any device that supports OpenCL including intel GPUs and CPUs, as well as GPUs from Nvidia and AMD.

Installation

Installation is easy, no need to mess with docker, python, clang or other shennanigans, works with both mri and jruby out of the box.

Add this line to your application's Gemfile:

ruby
gem 'tensor_stream'

And then execute:

$ bundle

Or install it yourself as:

$ gem install tensor_stream

Usage

Usage is similar to how you would use TensorFlow except with ruby syntax. There are also enhancements to the syntax to make it as consice as possible.

Linear regression sample:

…

You can take a look at spec/tensor_stream/operation_spec.rb for a list of supported ops and various examples and test cases used. Of course these contain only a sliver of what TensorFlow can do, so feel free to file a PR to add requested ops and test cases.

Other working samples can also be seen under tensor_stream/samples.

Samples that are used for development and are still being made to work can be found under test_samples

Python to Ruby guide

Not all ops are available. Available ops are defined in lib/tensor_stream/ops.rb, corresponding gradients are found at lib/tensor_stream/math_gradients.

There are also certain differences with regards to naming conventions, and named parameters:

Variables and Constants

To make referencing python examples easier it is recommended to use "tf" as the TensorStream namespace

At the beginning

ruby
tf = TensorStream # recommended to use tf since most sample models on the net use this
ts = TensorStream # use this if you plan to use TensorStream only features, so other devs will know about that

Note the difference in named and optional parameters

Python

python
w = ts.Variable(0, name='weights')
w = ts.Variable(0, 'weights')

Ruby

ruby
w = ts.variable(0, name: 'weights')
c = ts.constant(1.0)

# concise way when initializing using a constant
w = 0.t.var name: 'weights'
c = 1.0.t

Calling .t to Integer, Array and Float types converts it into a tensor

Shapes

Python

python
x = tf.placeholder(tf.float32, shape=(1024, 1024))
x = tf.placeholder(tf.float32, shape=(None, 1024))

ruby supports symbols for specifying data types, nil can be used for None

Ruby

ruby
x = ts.placeholder(:float32, shape: [1024, 1024])
x = ts.placeholder(:float32, shape: [nil, 1024])

# Another a bit more terse way
x = Float.placeholder shape: [1024, 1024]
y = Float.placeholder shape: [nil, 1024]

For debugging, each operation or tensor supports the to_math method

ruby
X = ts.placeholder("float")
Y = ts.placeholder("float")
W = ts.variable(rand, name: "weight")
b = ts.variable(rand, name: "bias")
pred = X * W + b
cost = ts.reduce_sum(ts.pow(pred - Y, 2)) / ( 2 * 10)
cost.to_math # "(reduce_sum(|((((Placeholder: * weight) + bias) - Placeholder_2:)^2)|) / 20.0)"

breakpoints can also be set, block will be evaluated during computation

ruby
a = ts.constant([2,2])
b = ts.constant([3,3])

f = ts.matmul(a, b).breakpoint! { |tensor, a, b, result_value| binding.pry }

ts.session.run(f)

OpenCL

For OpenCL support, make sure that the required OpenCL drivers for your hardware are correctly installed on your system. Also OpenCL only supports ruby-mri at the moment.

To use, include the following gem in your project:

gemfile
gem 'tensor_stream-opencl'

To use the opencl evaluator instead of the ruby evaluator simply require it (if using rails this should be loaded automatically).

ruby
require 'tensor_stream/opencl'

Adding the OpenCL evaluator should expose additional devices available to tensor_stream

ruby
ts.list_local_devices
# ["job:localhost/ts:ruby:cpu", "job:localhost/ts:opencl:apple:0", "job:localhost/ts:opencl:apple:1"]

Here we see 1 "ruby" cpu device and 2 opencl "apple" devices (Intel CPU, Intel Iris GPU)

By default TensorStream will determine using the given evaluators the best possible placement for each tensor operation

ruby
require 'tensor_stream/opencl'

# set session to use the opencl evaluator
sess = ts.session

sess.run(....) # do stuff

You can manually place operations using ts.device e.g:

ruby
ts = TensorStream
# Creates a graph. place in the first OpenCL CPU device

a, b = ts.device('/cpu:0') do
  a = ts.constant([1.0, 2.0, 3.0, 4.0, 5.0, 6.0], shape: [2, 3], name: 'a')
  b = ts.constant([1.0, 2.0, 3.0, 4.0, 5.0, 6.0], shape: [3, 2], name: 'b')
  [a, b]
end

c = ts.device('/device:GPU:0') do
  ts.matmul(a, b)
end

# Creates a session with log_device_placement set to True.
sess = ts.session(log_device_placement: true)
# Runs the op.
print(sess.run(c))

# a : apple:0
# b : apple:0
# a_1 : apple:0
# b_1 : apple:0
# matmul:0 : apple:1
# [[22.0, 28.0], [49.0, 64.0]] => nil

To force the ruby evaluator even with the OpenCL evaluator loaded you can use:

ruby
ts.device('/ts:ruby:cpu') do
    # put ops here
end

Note that the OpenCL evaluator provides speedup if you are using large tensors, tensors that are only using scalars like the linear regression sample will actually be slower.

samples/nearest_neighbor.rb contains a sample that uses opencl.

OpenCL support is maintained as a separate project at:

https://github.com/jedld/tensor_stream-opencl

Export Import Models from tensorflow

Experimental support for parsing and exporting pbtext files are supported:

Exporting

ruby
a = ts.constant([1.0, 1.0])
b = ts.constant([1.5, 1.5])
f = a + b

File.write('my_model.pbtext', f.graph.as_graph_def)

Importing (Experimental)

Note that not all tensorflow ops are supported, warnings will be showed if a certain operation is not supported yet.

ruby
  pbtext = File.read(File.join('linear_regression.pbtxt'))

  # create a graph from pbtext file
  graph = TensorStream::Graph.parse_from_string(pbtext)

  # reference a tensor by name from the created graph,
  # for example you have a tensor named out
  tensor = graph.get_tensor_by_name("out")

  # set graph as default and do operations on it
  graph.as_default do
    sess = ts.session
    expect(tr(sess.run(tensor))).to eq([[1.0, 1.0], [1.0, 1.0]])
  end

Visualization

tensorstream does not support tensorboard yet, but a graphml generator is included:

ruby
tf = TensorStream
a = tf.constant(1.0)
b = tf.constant(2.0)
result = a + b
sess = tf.session
sess.run(result)

File.write('gradients.graphml', TensorStream::Graphml.new.get_string(result)) # dump graph only
File.write('gradients.graphml', TensorStream::Graphml.new.get_string(result, sess)) # dump with values from session

the resulting graphml is designed to work with yED, after loading the graph change layout to "Flowchart" for best results

Exporting to TensorFlow

Still in alpha but tensorstream supports TensorFlows as_graph_def serialization method:

ruby
tf = TensorStream
a = tf.constant(1.0)
b = tf.constant(2.0)
result = a + b
File.write("model.pbtext", result.graph.as_graph_def)

Performance notes

Comparative performance with respect to other ruby libraries have not yet been performed. However it is notable that TruffleRuby and ruby-2.6.0 performs considerably better with respect to previous versions of ruby(< 2.6)

Benchmarks running samples/linear_regression.rb with tensor_stream 1.0.0 on an AMD(R) Ryzen(TM) 3 1300X CPU

ruby 2.5

$ ruby -v
ruby 2.5.1p57 (2018-03-29 revision 63029) [x86_64-linux]
$ ruby samples/linear_regression.rb
296 seconds 3000 epochs

ruby 2.6.0

$ ruby -v
ruby 2.6.0p0 (2018-12-25 revision 66547) [x86_64-linux]
$ ruby samples/linear_regression.rb
232 seconds 10000 epochs

ruby --jit samples/linear_regression.rb
222 seconds 10000 epochs

truffleruby

$ ruby -v
truffleruby 1.0.0-rc10, like ruby 2.4.4, GraalVM CE Native [x86_64-linux]
246 seconds 10000 epochs

jruby

$ ruby -v
jruby 9.2.0.0 (2.5.0) 2018-05-24 81156a8 OpenJDK 64-Bit Server VM 25.191-b12 on 1.8.0_191-8u191-b12-0ubuntu0.18.04.1-b12 +jit [linux-x86_64]
205 seconds 10000 epochs

For training large networks that works on images, the opencl evaluator is the only way to go.

Roadmap

  • Docs
  • Complete low-level op support
  • SciRuby evaluator
  • Opencl evaluator
  • TensorFlow savemodel compatibility

Issues

  • This is an early preview release and many things still don't work
  • Performance is not great, at least until the opencl and/or sciruby backends are complete
  • However if you really need an op supported please feel free to file a pull request with the corresponding failing test (see spec/operation_spec.rb)

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/tensor_stream. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.

License

The gem is available as open source under the terms of the MIT License.

Issues· 2 开放

查看全部 Issues在 GitHub 打开

暂无开放 Issues,或尚未同步最近议题。

> 标签

Rubymachine-learningtensorflow

暂无评论,来聊聊你的看法吧

> 工具信息

发布日期2026年8月1日
最后更新2026年9月17日
分类编程语言
定价开源

> 相关工具

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言