hmm

hmm

hmm is a heightmap meshing utility.

If you've done any 3D game development, 3D printing, or other such things, you've likely wanted to convert a grayscale heightmap image into a 3D mesh. The naive way is pretty simple but generates huge meshes with millions of triangles. After hacking my way through various solutions over the years, I finally decided I needed to write a good tool for this purpose.

hmm is a modern implementation of a nice algorithm from the 1995 paper Fast Polygonal Approximation of Terrains and Height Fields by Garland and Heckbert. The meshes produced by hmm satisfy the Delaunay condition and can satisfy a specified maximal error or maximal number of triangles or vertices. It's also very fast.

Dependencies

• C++11 or higher
• glm

Installation

brew install glm # on macOS
sudo apt-get install libglm-dev # on Ubuntu / Debian

git clone https://github.com/fogleman/hmm.git
cd hmm
make
make install

Usage

…

hmm supports a variety of file formats like PNG, JPG, etc. for the input heightmap. The output is always a binary STL file. The only other required parameter is -z, which specifies how much to scale the Z axis in the output mesh.

$ hmm input.png output.stl -z ZSCALE

You can also provide a maximal allowed error, number of triangles, or number of vertices. (If multiple are specified, the first one reached is used.)

$ hmm input.png output.stl -z 100 -e 0.001 -t 1000000

Visual Guide

Click on the image below to see examples of various command line arguments. You can try these examples yourself with this heightmap: gale.png.

Z Scale

The required -z parameter defines the distance between a fully black pixel and a fully white pixel in the vertical Z axis, with units equal to one pixel width or height. For example, if each pixel in the heightmap represented a 1x1 meter square area, and the vertical range of the heightmap was 100 meters, then -z 100 should be used.

Z Exaggeration

The -x parameter is simply an extra multiplier on top of the provided Z scale. It is provided as a convenience so you don't have to do multiplication in your head just to exaggerate by, e.g. 2x, since Z scales are often derived from real world data and can have strange values like 142.2378.

Max Error

The -e parameter defines the maximum allowed error in the output mesh, as a percentage of the total mesh height. For example, if -e 0.01 is used, then no pixel will have an error of more than 1% of the distance between a fully black pixel and a fully white pixel. This means that for an 8-bit input image, an error of e = 1 / 256 ~= 0.0039 will ensure that no pixel has an error greater than one full grayscale unit. (It may still be desirable to use a lower value like 0.5 / 256.)

Base Height

When the -b option is used to create a solid mesh, it defines the height of the base before the lowest part of the heightmesh appears, as a percentage of the heightmap's height. For example, if -z 100 -b 0.5 were used, then the final mesh would be about 150 units tall (if a fully white pixel exists in the input).

Border

A border can be added to the mesh with the --border-size and --border-height flags. The heightmap will be padded by border-size pixels before triangulating. The (pre-scaled) Z value of the border can be set with border-height which defaults to 1.

Filters

A Gaussian blur can be applied with the --blur flag. This is particularly useful for noisy images.

The heightmap can be inverted with the --invert flag. This is useful for lithophanes.

The heightmap can be auto-leveled with the --level flag. This will stretch the grayscale values to use the entire black => white range.

A gamma curve can be applied to the heightmap with the --gamma flag. This applies x = x ^ gamma to each pixel, where x is in [0, 1].

Normal Maps

A full resolution normal map can be generated with the --normal-map argument. This will save a normal map as an RGB PNG to the specified path. This is useful for rendering higher resolution bumps and details while using a lower resolution triangle mesh.

Hillshade Images

A grayscale hillshade image can be generated with the --shade-path argument. The altitude and azimuth of the light source can be changed with the --shade-alt and --shade-az arguments, which default to 45 degrees in altitude and 0 degrees from north (up).

Performance

Performance depends a lot on the amount of detail in the heightmap, but here are some figures for an example heightmap of a 40x40 kilometer area centered on Mount Everest. Various heightmap resolutions and permitted max errors are shown. Times computed on a 2018 13" MacBook Pro (2.7 GHz Intel Core i7).

Runtime in Seconds

Number of Triangles Output

TODO

• reconstruct grayscale image?
• better error handling, especially for file I/O
• better overflow handling - what's the largest supported heightmap?
• mesh validation?