百科.dev
全部条目在线工具AI 编程趋势榜开源项目技术资讯提交条目
登录
< 返回工具列表
L

libdmtx

> 编程语言
开源

libdmtx 图书馆

365 stars0 点赞0 次浏览
访问官网GitHub

工具介绍

libdmtx 图书馆

================================================================= libdmtx - Open Source Data Matrix Software =================================================================

           libdmtx README file (all platforms)

This summary of the libdmtx package applies generally to all platforms. For instructions regarding your specific platform, also see the README.xxx file in this directory that matches your system (e.g., README.linux, README.osx, etc...).

  1. Introduction

libdmtx is a software library that enables programs to read and write Data Matrix barcodes of the modern ECC200 variety. The library runs natively on several platforms and can be accessed by multiple languages using the libdmtx language wrappers. The utility programs dmtxread and dmtxwrite also provide a command line interface for libdmtx, and serve as a good reference for developers writing their own libdmtx-enabled programs.

This package (libdmtx) contains only the core library, and is distributed under a Simplified BSD license with an alternate waiver option. See the LICENSE file in the main project directory for full terms of use and distribution.

The non-library components related to libdmtx are available as separate downloads, and are distributed under a different license (typically LGPLv2). Please contact [email protected] if you require clarification on licensing. It's not complicated, but it's important to us that all license terms are respected (not just ours).

  1. Project Components

The libdmtx project serves a diverse audience and contains many components -- some of which may not be useful to you. Components fall into one of four categories:

Description Package Audience


Core library libdmtx libdmtx programs Test programs libdmtx libdmtx developers Utility programs dmtx-utils Shell and command line Language Wrappers dmtx-wrappers Non-C/C++ developers

  1. Installation

libdmtx uses GNU Autotools so installation should be familiar to free software veterans. If your platform cannot easily run the Autotools scripts, refer to the appropriate platform-specific README.xxx located in this directory for alternate instructions.

In theory the following 3 steps would build and install libdmtx on your system:

$ ./configure $ make $ sudo make install

However, you may need to install additional software or make other changes for these steps to work properly. The details below will help to address errors and/or customize beyond the defaults.

Problems with "configure" step

If you obtained libdmtx from Git you may have received an error like "./configure: No such file or directory". Run this command before trying again:

$ ./autogen.sh

The autogen.sh command requires autoconf, automake, libtool, and pkgconfig to be installed on your system.

The configure script also offers many options for customizing the build process, described in detail by running:

$ ./configure --help

Problems with "make" step

Errors encountered during the "make" step are often a result of missing software dependencies. Install any missing software mentioned in the error message(s) and try again.

Problems with "sudo make install" step

If the 'sudo' command is not configured on your system, you can alternatively yell "Yeeehaww!" as you log in as root and run it like this:

make install

And finally...

If you want to verify that everything is working properly you can optionally build the test programs:

$ make check

This command will not perform any tests, but will build the programs that contain test logic: multi_test, rotate_test, simple_test, and unit_test.

Note: multi_test and rotate_test contain extra dependencies due to their graphical nature, and are not terribly useful unless you need to test the library's internals.

  1. Contact

Documentation wiki: libdmtx.wikidot.com GitHub page: github.com/dmtx/libdmtx OhLoh.net page: www.ohloh.net/projects/libdmtx Open mailing list: [email protected]

  1. This Document

This document is derived from the wiki page located at:

http://libdmtx.wikidot.com/general-instructions

If you find an error or have additional helpful information, please edit the wiki directly with your updates.

Issues· 0 开放

查看全部 Issues在 GitHub 打开

暂无开放 Issues,或尚未同步最近议题。

> 标签

C

暂无评论,来聊聊你的看法吧

> 工具信息

发布日期2026年8月1日
最后更新2026年9月17日
分类编程语言
定价开源

> 相关工具

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言