百科.dev
全部条目在线工具AI 编程趋势榜开源项目技术资讯提交条目
登录
< 返回工具列表
B

batear

> 编程语言
开源

● batear — 成本极低、离网的声学无人机探测器。边缘计算。使用麦克风保护您的空域。

373 stars0 点赞1 次浏览
访问官网GitHub

工具介绍

● batear — 成本极低、离网的声学无人机探测器。边缘计算。使用麦克风保护您的空域。


️ Support the Mission (501(c)(3) Tax Deductible)

Batear is officially fiscally hosted by the Open Source Collective (OSC). Your contribution directly supports the deployment of civil defense technology where it is needed most.

  • Field Testing in Ukraine: We are partnering with local experts to verify Batear in active EW (Electronic Warfare) environments.
  • Hardware R&D: Funding allows us to procure high-precision sensors (ICS-43434) and PoE-capable hardware for professional-grade reliability.
  • Corporate Matching: Since we are a 501(c)(3) non-profit project, check if your employer matches your donation!
  • 100% Transparent: View every single receipt and transaction on our Public Ledger.

** Become a Sponsor on Open Collective**


Drones are an increasing threat to homes, farms, and communities — and effective detection has traditionally required expensive radar or camera systems. Batear changes that.

For ultra-low-cost hardware, Batear turns a tiny ESP32-S3 microcontroller and a MEMS microphone into an always-on acoustic drone detector. It runs entirely at the edge — no cloud subscription, no internet connection, no ongoing cost. Deploy one at a window, a fence line, or a rooftop and it will alert you the moment drone rotor harmonics are detected nearby.

The same codebase builds as a Detector (mic + LoRa TX), a Gateway (LoRa RX + OLED + LED + MQTT), or a Wired Detector (mic + Ethernet/PoE + MQTT), selectable at build time. The gateway forwards alerts to Home Assistant via MQTT with automatic device discovery; the wired detector publishes directly over Ethernet — no LoRa or gateway required, ideal for permanent installations.


Web Flasher — Zero Install

Flash firmware directly from your browser — no toolchain needed:

Open Web Flasher

Requires Chrome or Edge on desktop. Connect a Heltec V3/V4 (Detector or Gateway) or a LILYGO T-ETH-Lite S3 (Wired Detector) via USB-C and click Install.


Smart Home Integration (Home Assistant)

Stop checking serial monitors. Batear brings drone detection directly to your dashboard.

Features:

  • Plug & Play: Auto-Discovery via MQTT.
  • Rich Diagnostics: Monitor signal strength (RSSI/SNR) in real-time.
  • Automations Ready: Trigger your smart lights, alarms, or notifications when a drone is detected.
  • Historical Logs: Analyze drone activity patterns in your area.

"Batear bridges the gap between complex signal processing and simple home automation."


Documentation

Full documentation is available at batear.io.

Getting Started Prerequisites and supported boards
Hardware Parts list, wiring diagrams, pin map
Build & Flash Compile and flash the firmware
Configuration Encryption keys, frequencies, MQTT, device IDs
How It Works FFT harmonic detection algorithm
Calibration Tuning detection thresholds
Adding a Board Porting to new hardware

️ System Architecture

Batear supports two deployment models — pick whichever fits the site:

Wireless (LoRa Detector → Gateway → MQTT)

…

Wired (Ethernet/PoE Detector → MQTT, no gateway)

┌──────────────────────┐
│  WIRED DETECTOR (×N) │       Ethernet (PoE)
│                      │ ───────────────────────────► ┌──────────────────────┐
│  ICS-43434 mic       │       MQTT / JSON            │   HOME ASSISTANT     │
│  FFT harmonic detect │       + REST API / OTA       │   (auto-discovery)   │
│  W5500 Ethernet      │                              └──────────────────────┘
└──────────────────────┘
   LILYGO T-ETH-Lite S3

⚡ Quick Start (Build from Source)

bash
# Clone
git clone https://github.com/batear-io/batear.git && cd batear

# Build detector  (swap sdkconfig.detector → sdkconfig.gateway or
# sdkconfig.wired_detector for the other roles)
idf.py -B build_detector \
  -DSDKCONFIG=build_detector/sdkconfig \
  -DSDKCONFIG_DEFAULTS="sdkconfig.defaults;sdkconfig.detector" \
  set-target esp32s3
idf.py -B build_detector -DSDKCONFIG=build_detector/sdkconfig build

# Flash (replace PORT)
idf.py -B build_detector -DSDKCONFIG=build_detector/sdkconfig -p PORT flash monitor

See the full build guide for gateway and wired-detector setup and detailed instructions.


Maintainers

Batear is a community-driven project. We welcome contributions, whether through code, field data, or financial sponsorship.

Issues· 0 开放

查看全部 Issues在 GitHub 打开

暂无开放 Issues,或尚未同步最近议题。

> 标签

Cacousticanti-wardronedrone-detection

暂无评论,来聊聊你的看法吧

> 工具信息

发布日期2026年8月1日
最后更新2026年9月17日
分类编程语言
定价开源

> 相关工具

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言