这是一款第三方工具,用于通过 UART 加载和执行二进制文件,适用于 MediaTek SoC。MediaTek 智能手机 SoC 上的 BootROM 恢复支持已在 Android 10 版本中添加。
这是一款第三方工具,用于通过 UART 加载和执行二进制文件,适用于 MediaTek SoC。MediaTek 智能手机 SoC 上的 BootROM 恢复支持已在 Android 10 版本中添加。
A third-party tool to load and execute binaries over UART for Mediatek SoCs.
The BootROM recovery support on Mediatek smartphone SoCs is also available on their ARM-based router SoCs over UART. However, there's no SP Flash Tool and accompanying download agent released for these router chips.
This tool implements basic support to load and execute a custom binary over UART as the download agent on Mediatek ARM SoCs with secure-boot disabled. With this, it's possible to recover Mediatek ARM routers over UART even if the bootloader in flash is completely broken.
The UART recovery protocol is exactly the same as the USB one on MTK smartphone SoCs, which has already been reverse-engineered by others. The knowledge of the protocol details come from these two projects:
This utility should work on all Mediatek SoCs with secure-boot disabled. It's been tested on MT7622/MT7629 and MT798x.
This utility won't work on secure-boot enabled routers.
…Load and start a bootloader on ARM64 SoCs:
./mtk_uartboot -s /dev/ttyUSB0 -p da.bin --aarch64Omit --aarch64 if you are working with ARMv7 SoCs.
If there's only one serial interface available on your system, you can omit -s as well. The program will use the first serial port it finds.
This utility also supports a UART-boot protocol available in BL2 on Mediatek routers. When using such a BL2 built with UART recovery as download agent, it can subsequently load and start an FIP after BL2 is started:
./mtk_uartboot -p bl2.bin --aarch64 -f bl31-uboot.fip暂无开放 Issues,或尚未同步最近议题。