laravel-webhook-client

A webhook is a way for an app to provide information to another app about a specific event. The way the two apps communicate is with a simple HTTP request.

This package allows you to receive webhooks in a Laravel app. It has support for verifying signed calls, storing payloads and processing the payloads in a queued job.

If you need to send webhooks, take a look at our laravel-webhook-server package.

Support us

We invest a lot of resources into creating best in class open source packages. You can support us by buying one of our paid products.

We highly appreciate you sending us a postcard from your hometown, mentioning which of our package(s) you are using. You'll find our address on our contact page. We publish all received postcards on our virtual postcard wall.

Installation

You can install the package via composer:

composer require spatie/laravel-webhook-client

Configuring the package

You can publish the config file with:

php artisan vendor:publish --provider="Spatie\WebhookClient\WebhookClientServiceProvider" --tag="webhook-client-config"

This is the contents of the file that will be published at config/webhook-client.php:

…

In the signing_secret key of the config file, you should add a valid webhook secret. This value should be provided by the app that will send you webhooks.

This package will try to store and respond to the webhook as fast as possible. Processing the payload of the request is done via a queued job. It's recommended to not use the sync driver but a real queue driver. You should specify the job that will handle processing webhook requests in the process_webhook_job of the config file. A valid job is any class that extends Spatie\WebhookClient\Jobs\ProcessWebhookJob and has a handle method.

Preparing the database

By default, all webhook calls will get saved in the database.

To create the table that holds the webhook calls, you must publish the migration with:

php artisan vendor:publish --provider="Spatie\WebhookClient\WebhookClientServiceProvider" --tag="webhook-client-migrations"

After the migration has been published, you can create the webhook_calls table by running the migrations:

php artisan migrate

Taking care of routing

Finally, let's take care of the routing. At the app that sends webhooks, you probably configure an URL where you want your webhook requests to be sent. In the routes file of your app, you must pass that route to Route::webhooks. Here's an example:

Route::webhooks('webhook-receiving-url');

Behind the scenes, by default this will register a POST route to a controller provided by this package. Because the app that sends webhooks to you has no way of getting a csrf-token, you must exclude the route from csrf token validation.

Here is how you can do that in recent versions of Laravel.

use Illuminate\Foundation\Application;
use Illuminate\Foundation\Configuration\Middleware;

return Application::configure(basePath: dirname(__DIR__))
    ->withRouting(
       // ...
    )
    ->withMiddleware(function (Middleware $middleware) {
        $middleware->preventRequestForgery(except: [
            'your-webhook-receiving-url'
        ]);
    })->create();

In old versions of Laravel you can add your webhook route to the except array of the VerifyCsrfToken middleware:

protected $except = [
    'your-webhook-receiving-url',
];

Usage

With the installation out of the way, let's take a look at how this package handles webhooks. First, it will verify if the signature of the request is valid. If it is not, we'll throw an exception and fire off the InvalidWebhookSignatureEvent event. Requests with invalid signatures will not be stored in the database.

Next, the request will be passed to a webhook profile. A webhook profile is a class that determines if a request should be stored and processed by your app. It allows you to filter out webhook requests that are of interest to your app. You can easily create your own webhook profile.

If the webhook profile determines that request should be stored and processed, we'll first store it in the webhook_calls table. After that, we'll pass that newly created WebhookCall model to a queued job. Most webhook sending apps expect you to respond very quickly. Offloading the real processing work allows for speedy responses. You can specify which job should process the webhook in the process_webhook_job in the webhook-client config file. Should an exception be thrown while queueing the job, the package will store that exception in the exception attribute on the WebhookCall model.

After the job has been dispatched, the request will be passed to a webhook response. A webhook response is a class that determines the HTTP response for the request. An 'ok' message response with a 200 status code is returned by default, but you can easily create your own webhook response.

Verifying the signature of incoming webhooks

This package assumes that an incoming webhook request has a header that can be used to verify the payload has not been tampered with. The name of the header containing the signature can be configured in the signature_header_name key of the config file. By default, the package uses the DefaultSignatureValidator to validate signatures. This is how that class will compute the signature.

$computedSignature = hash_hmac('sha256', $request->getContent(), $configuredSigningSecret);

If the $computedSignature does match the value, the request will be passed to the webhook profile. If $computedSignature does not match the value in the signature header, the package will respond with a 500 and discard the request.

Creating your own signature validator

A signature validator is any class that implements Spatie\WebhookClient\SignatureValidator\SignatureValidator. Here's what that interface looks like.

use Illuminate\Http\Request;
use Spatie\WebhookClient\WebhookConfig;

interface SignatureValidator
{
    public function isValid(Request $request, WebhookConfig $config): bool;
}

WebhookConfig is a data transfer object that lets you easily pull up the config (containing the header name that contains the signature and the secret) for the webhook request.

After creating your own SignatureValidator you must register it in the signature_validator in the webhook-client config file.

Determining which webhook requests should be stored and processed

After the signature of an incoming webhook request is validated, the request will be passed to a webhook profile. A webhook profile is a class that determines if the request should be stored and processed. If the webhook sending app sends out request where your app isn't interested in, you can use this class to filter out such events.

By default the \Spatie\WebhookClient\WebhookProfile\ProcessEverythingWebhookProfile class is used. As its name implies, this default class will determine that all incoming requests should be stored and processed.

Creating your own webhook profile

A webhook profile is any class that implements \Spatie\WebhookClient\WebhookProfile\WebhookProfile. This is what that interface looks like:

namespace Spatie\WebhookClient\WebhookProfile;

use Illuminate\Http\Request;

interface WebhookProfile
{
    public function shouldProcess(Request $request): bool;
}

After creating your own WebhookProfile you must register it in the webhook_profile key in the webhook-client config file.

Storing and processing webhooks

After the signature is validated and the webhook profile has determined that the request should be processed, the package will store and process the request.

The request will first be stored in the webhook_calls table. This is done using the WebhookCall model.

Should you want to customize the table name or anything about the storage behavior, you can let the package use an alternative model. A webhook storing model can be specified in the webhook_model. Make sure your model extends Spatie\WebhookClient\Models\WebhookCall.

You can change how the webhook is stored by overriding the storeWebhook method of WebhookCall. In the storeWebhook method you should return a saved model.

Next, the newly created WebhookCall model will be passed to a queued job that will process the request. Any class that extends \Spatie\WebhookClient\Jobs\ProcessWebhookJob is a valid job. Here's an example:

namespace App\Jobs;

use Spatie\WebhookClient\Jobs\ProcessWebhookJob as SpatieProcessWebhookJob;

class ProcessWebhookJob extends SpatieProcessWebhookJob
{
    public function handle()
    {
        // $this->webhookCall // contains an instance of `WebhookCall`

        // perform the work here
    }
}

You should specify the class name of your job in the process_webhook_job of the webhook-client config file.

Creating your own webhook response

A webhook response is any class that implements \Spatie\WebhookClient\WebhookResponse\RespondsToWebhook. This is what that interface looks like:

namespace Spatie\WebhookClient\WebhookResponse;

use Illuminate\Http\Request;
use Spatie\WebhookClient\WebhookConfig;

interface RespondsToWebhook
{
    public function respondToValidWebhook(Request $request, WebhookConfig $config);
}

After creating your own WebhookResponse you must register it in the webhook_response key in the webhook-client config file.

Handling incoming webhook request for multiple apps

This package allows webhooks to be received from multiple different apps. Let's take a look at an example config file where we add support for two webhook URLs. All comments from the config have been removed for brevity.

…

When registering routes for the package, you should pass the name of the config as a second parameter.

Route::webhooks('receiving-url-for-app-1', 'webhook-sending-app-1');
Route::webhooks('receiving-url-for-app-2', 'webhook-sending-app-2');

Change route method

Being an incoming webhook client, there are instances where you might want to establish a route method other than the default post. You have the flexibility to modify the standard post method to options such as get, query, put, patch, or delete.

Route::webhooks('receiving-url-for-app-1', 'webhook-sending-app-1', 'get');
Route::webhooks('receiving-url-for-app-1', 'webhook-sending-app-1', 'put');
Route::webhooks('receiving-url-for-app-1', 'webhook-sending-app-1', 'patch');
Route::webhooks('receiving-url-for-app-1', 'webhook-sending-app-1', 'delete');

If a webhook sender uses several methods on the same endpoint, pass an array of methods to register them all on a single route.

Route::webhooks('receiving-url-for-app-1', 'webhook-sending-app-1', ['post', 'put']);

Using the package without a controller

If you don't want to use the routes and controller provided by your macro, you can programmatically add support for webhooks to your own controller.

Spatie\WebhookClient\WebhookProcessor is a class that verifies the signature, calls the web profile, stores the webhook request, and starts a queued job to process the stored webhook request. The controller provided by this package also uses that class [under the hood](https://github.com/spatie/laravel-webhook-client/blob/2172f79eda7d6f86a01554be9b444b9e31343610/s