TizenRT is a lightweight RTOS-based platform to support low-end IoT devices
TizenRT is a lightweight RTOS-based platform to support low-end IoT devices
TizenRT is lightweight RTOS-based platform to support low-end IoT devices.
Please find project details at Wiki especially documentations page.
TizenRT provides the easiest way to build with the use of Docker. There is no need to install the required libraries and toolchains since the provided Docker container already includes everything required for TizenRT development. However, if your development systems are not eligible for running the Docker container, all libraries and toolchains should be manually installed. Please refer to Manual Setup Build Environment.
For more information of libraries in the TizenRT Docker Image, see https://hub.docker.com/r/tizenrt/tizenrt/.
To install OS specific Docker engines, see https://docs.docker.com/install/. For example, if you are using Ubuntu, you need to install the Docker engine located at https://docs.docker.com/install/linux/docker-ce/ubuntu/. If you already have a Docker engine, please skip this step.
If you are building TizenRT on a Windows environment, you need to first configure CRLF as shown below:
git config --global core.autocrlf inputNow, clone TizenRT source code as shown below:
git clone https://github.com/Samsung/TizenRT.git
cd TizenRT
TIZENRT_BASEDIR="$PWD"Note To contribute in this community, you need to create a fork, and clone your forked private repository instead of the main repository. Github guides this by working-with-forks.
There are two ways to build TizenRT.
TizenRT provides an interactive tool (dbuild.sh) where you are prompted to select a option among multiple choices. According to your selection, it consecutively provides next-step options. When you become familiar to the TizenRT build system, you may use the dbuild.sh script with a specific build option.
Note As the build script is running based on Docker, it requires sudo for root permission. To run Docker without sudo, refer to https://docs.docker.com/install/linux/linux-postinstall/.
To get started, use the dbuild.sh script with the menu option as follows:
cd os
./dbuild.sh menuThis command shows you the complete list of supported boards first as shown below:
======================================================
"Select Board"
======================================================
"1. artik053"
"2. cy4390x"
...
"x. EXIT"
======================================================After the board selection, you are prompted to select configuration of the given board:
======================================================
"Select Configuration of artik053"
======================================================
"1. hello"
"2. tc"
...
"x. EXIT"
======================================================Finally, you are prompted to select a build option as shown below:
======================================================
"Select build Option"
======================================================
"1. Build with Current Configuration"
"2. Re-configure"
"3. Modify Current Configuration"
"4. Clean Build"
"5. Clean Build and Re-Configure"
"6. Build SmartFS Image"
"d. Download"
"t. Build Test"
"x. Exit"
======================================================Once the board and configuration selection is finished,
you are prompted to select a build option repeatedly until you remove configuration by the Re-configure or Build Dist-Clean option.
cd os
./tools/configure.sh /This command retrieves the specific pre-configured file named defconfig and Make.defs according to /.
Once the configuration is done, you can skip this step next time unless you want to change your configuration.
You can see collection of all configuration files at $TIZENRT_BASEDIR/build/configs.
To check all pre-defined configurations, type as follows:
./tools/configure.sh --helpAfter basic configuration by 1. Configuration, you can additionally modify your configuration with menuconfig.
./dbuild.sh menuconfigNote In Docker environment,
make menuconfigcommand from other README files should be replaced with this command.make menuconfigapplies only in Manual Setup Build Environment.
There are two aspects to compilation, namely Build and Clean, which are described as follows:
To compile, simply type the following:
./dbuild.shAfter compilation, built binaries will be located in $TIZENRT_BASEDIR/build/output/bin.
There are two types of clean commands, clean and distclean.
./dbuild.sh cleanThis command removes built files including objects, libraries, .depend, Make.dep, etc.
After modifying configuration with menuconfig, this command is required.
./dbuild.sh distcleanThis command includes the clean option and additionally removes configured files including .config, Make.defs and linked folders / files.
Before changing basic configuration with ./configure.sh command, this command is required to delete pre-set configurations.
./dbuild.sh download [OPTION]TizenRT supports download command to program a binary into a board.
You might be required to set up USB driver. For more information, please refer to Supported board / Emulator.
OPTION designates which flash partitions are flashed.
For example, ALL means programming all of binaries. This also depends on each board.
You can give multiple build options to the dbuild.sh script as mentioned below:
./dbuild.sh distclean configure artik053 hello build download allThis executes sequentially multiple commands including
TizenRT supports multiple boards as well as QEMU.
The linked page for each board includes board-specific environments, programming method, and board information.
ARTIK053 [details]
ARTIK053S [details]
ARTIK055S [details]
CY4390X [details]
ESP32-DevKitC [details]
ESP-WROVER-KIT [details]
iMX RT 1020 EVK [details]
iMX RT 1050 EVK [details]
SIDK_S5JT200 [details]
STM32F407-DISC1 [details]
STM32F429I-DISCO [details]
STM32L4R9AI-DISCO [details]
QEMU [details]
No open issues yet, or sync has not completed.