mingo output incorrectly aligned

Author: simgarCreated Dec 26, 2024Updated Dec 26, 2024

I've been using scip with my RPi3 and 'RPi serial output to USB cable'. I've also been using Python's miniterm for comparison. With the command:

bash

sudo python3 -m serial.tools.miniterm /dev/ttyUSB0 921600

I get

--- Miniterm on /dev/ttyUSB0  921600,8,N,1 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
[0] mingo version 0.5.0
[1] Booting on: Raspberry Pi 3
[2] Drivers loaded:
	  1. BCM PL011 UART
	  2. BCM GPIO
[3] Chars written: 117
[4] Echoing input now

When I use scip with:

scip /dev/ttyUSB0 921600

I get:

Welcome to scip.
To exit type <Enter> + ~ + .
or unplug the serial port.
[0] mingo version 0.5.0
					   [1] Booting on: Raspberry Pi 3
													 [2] Drivers loaded:
																			  1. BCM PL011 UART
					 2. BCM GPIO
								[3] Chars written: 117
													  [4] Echoing input now

Here, it was stated that mingo is only sending \n where it should be sending \r\n.

Source: rust-embedded/rust-raspberrypi-OS-tutorials

View original on GitHub View discussion on GitHub