rmk

A modern, easy-to-use, and feature-rich keyboard firmware written in Rust.

Join our Discord server for discussions, support, and community collaboration!

中文

Features

• Broad microcontroller compatibility: Leveraging embassy, RMK supports a comprehensive range of microcontrollers, including stm32, nRF, rp2040(w), esp32, etc
• Dynamic keymap customization: RMK offers real-time keymap modifications through Vial, or its native Rynk protocol (experimental). You can even edit keymaps over BLE connections wirelessly
• Advanced keyboard functionality: RMK comes with lots of advanced keyboard features by default, including layer switching, media controls, system commands, mouse control, and more
• Wireless connectivity: BLE wireless support with automatic reconnection and multi-device capabilities for nRF52, nRF54, esp32, Pi Pico W and SF32LB52 microcontrollers, tested on nRF52840, nRF54L15, nRF54LM20, esp32c3, esp32c6, esp32h2, esp32s3, Pi Pico W
• Easy configuration: RMK simplifies keyboard development through a single keyboard.toml configuration file. For Rust enthusiasts, the firmware remains highly customizable using Rust code
• Optimized performance: RMK achieves approximately 2ms latency in wired mode and 10ms in wireless mode. With the async_matrix feature enabled, power consumption is significantly reduced—a 2000mAh battery can power your keyboard for several months

User Documentation | API Reference | FAQs | Changelog

Real-World Implementations

Getting Started

Option 1: Start with a Template

Quickly bootstrap your project using rmkit and the official RMK project template.

cargo install rmkit flip-link
# If you encounter installation issues on Windows, try this alternative command:
# powershell -ExecutionPolicy ByPass -c "irm https://github.com/rmk-rs/rmkit/releases/latest/download/rmkit-installer.ps1 | iex"
rmkit init

For comprehensive guidance, refer to the User Guide.

Option 2: Explore Built-in Examples

Browse the examples in the examples directory. Below are step-by-step instructions for rp2040 development. The process is similar for other microcontrollers when using a debug probe.

rp2040 Setup

1. Install probe-rs

   bash复制

   curl --proto '=https' --tlsv1.2 -LsSf https://github.com/probe-rs/probe-rs/releases/latest/download/probe-rs-tools-installer.sh | sh

2. Build the firmware

   bash复制

   cd examples/use_rust/rp2040
   cargo build --release

3. Flash using a debug probe

   With a debug probe connected to your rp2040 board, simply run:

   bash复制

   cd examples/use_rust/rp2040
   cargo run --release

4. (Optional) Flash via USB

   Without a debug probe, you can use elf2uf2-rs to flash via USB:

   1. Install the tool: cargo install elf2uf2-rs
   2. Modify examples/use_rust/rp2040/.cargo/config.toml to use elf2uf2:
      diff复制

      - runner = "probe-rs run --chip RP2040"
      + runner = "elf2uf2-rs -d"

   3. Connect your rp2040 board while holding the BOOTSEL button until the USB drive appears
   4. Flash the firmware:
      bash复制

      cd examples/use_rust/rp2040
      cargo run --release

      Upon successful completion, you'll see output similar to:
      bash复制

      Finished release [optimized + debuginfo] target(s) in 0.21s
      Running `elf2uf2-rs -d 'target\thumbv6m-none-eabi\release\rmk-rp2040'`
      Found pico uf2 disk G:\
      Transfering program to pico
      173.00 KB / 173.00 KB [=======================] 100.00 % 193.64 KB/s

Development Roadmap

Current roadmap of RMK can be found here.

Minimum Supported Rust Version (MSRV)

RMK is developed against the latest stable Rust release. While other versions may work, they are not fully tested.

License

RMK is licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.