programmable e-paper tag with RFID
ggtag is an e-paper tag that can be programmed with sound using the ggwave library.
It is based on the RP2040 microcontroller and has 3.52" e-paper display.
Additionally, ggtag supports USB serial programming and allows emulation of 125kHz RFID tags (ASK and FSK).
The GGtag's CrowdSupply campaign has started, you can order one here!
Some example tags:
Both firmware and hardware are open source and licensed under the GPLv3 license. The PCB is made by Eurolan, you can find more details about the hardware design in the hardware directory.
ggtag can be programmed either with sound or with USB serial.
To program with sound, you need to put a CR2032 battery in the battery holder and flip the switch to the BATT position.
To program with USB serial, you need to connect ggtag to a USB host and flip the switch to the USB position.
Both programming modes are supported in the web interface hosted at ggtag.io, all you need is a modern HTML browser.
Here is a demonstration of how programming with sound works. Initially, three ggtags are listening and then programmed simultaneously using mobile phone.
After the initial programming, you need to press the button on the side for ggtag to start listening again. At the end make sure to flip the switch back to USB position in order to preserve the battery.
https://user-images.githubusercontent.com/271616/233822561-fff766fd-9242-4774-a4a4-4f87c363f370.mp4
The web interface is using Web Serial API for USB serial programming, so you need a web browser (e.g. Chrome, Edge) which supports this API. Mobile Chrome running on Android is also supported. Here is a demo of using Pixel5 phone for USB serial programming:
https://github.com/rgerganov/ggtag/assets/271616/d471cdec-4e41-4382-ae9f-f745ea71745e
You can emulate 125kHz RFID tags with ggtag. This is accomplished with an ATtiny85 MCU and the avrfid firmware. When ggtag receives an RFID command, it generates the corresponding avrfid firmware and programs the ATtiny85 with it. Demo with Flipper Zero:
https://github.com/rgerganov/ggtag/assets/271616/654c1e1a-a8cb-4189-a39e-80669b1f9637
Another demo with USB RFID reader:
https://github.com/rgerganov/ggtag/assets/271616/f1d7bd59-880e-44ea-8732-c919e1119cd3
There is a web audio receiver which implements the ggtag protocol running at https://ggtag.io/recv/. This could be
No open issues yet, or sync has not completed.