AC Servo Driver for STM32F4
Build Log: https://travis-ci.org/rene-dev/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.
This software is released under the GPLv3.
There is work in progress on documentation: https://github.com/rene-dev/stmbl/blob/master/docs/src/Getting%20Started.adoc
IRC: #stmbl on irc.hackint.eu https://webirc.hackint.org/#stmbl
STMBL is an open source servo drive designed for Retrofitting CNC machines and Robots. It supports Industrial AC and DC servos with up to 320V and 2kW (see specs for details).
Documentation about the PCB and pinout of the feedback connector:
https://github.com/rene-dev/stmbl/wiki/Pinouts
https://github.com/rene-dev/stmbl/wiki/PCB
https://www.youtube.com/watch?v=d6NH1W7DUnQ
https://www.youtube.com/watch?v=oTllxnYAgFc
https://www.youtube.com/watch?v=gwgnAeGjZrA
https://www.youtube.com/watch?v=wXLcAZwjlzE
https://www.youtube.com/watch?v=24LftGNp4MI
https://www.youtube.com/watch?v=kqenepupJIs
https://www.youtube.com/watch?v=-E1o_5cFyto
Should you find the GPL license insufficient for your needs, other licenses can be purchased from my company.
Likewise, please contact us should you wish to fund the further development of this project, or are interesed in custom hardware, software, or commercial support.
No open issues yet, or sync has not completed.