Baike.dev
All toolsOnline toolsAI codingTrendingOpen sourceNewsSubmit
Log in
< Back to tools
U

unitemp-flipperzero

> 编程语言
Open source

Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

351 stars0 likes0 views
WebsiteGitHub

About

Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

️ Unitemp - Universal temperature sensor reader

An app for Flipper Zero that turns your gadget into a multifunctional environmental sensor. It can read data from various sensors you connect to Flipper Zero, for example, temperature, humidity, atmospheric pressure, and even CO₂ levels. You can assess the climate at home or in the office, or simply use Flipper Zero as a portable thermometer.

Features

  • Real-time display of temperature, humidity, pressure, and CO₂ concentration.
  • Heat index and dew point temperature display.
  • Environmental quality analysis and visual and audible indicators (good , normal , poor , dangerous )
  • Automatic and manual selection of temperature (degrees Celsius/Fahrenheit) and pressure (mmHg/inHg/kPa/hPa) units.
  • Support for a wide range of digital sensors with I²C, SPI, 1-Wire, and Single Wire connectivity.
  • User-friendly and intuitive interface.

Installation

Just install from the application catalog https://lab.flipper.net/apps/unitemp or the mobile application

..or use the ufbt to compile and install directly to Flipper.

bash
git clone https://github.com/quen0n/unitemp-flipperzero.git
cd unitemp-flipperzero
git checkout -b master
ufbt update
ufbt && ufbt launch 

Connecting sensors

To connect, you will need a supported sensor and Dupont male-female wires. The connection method depends on the interface.

Single Wire (DHT11 and etc)

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
Data any free digital port

1-Wire (DS18B20 and etc)

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
Data any free digital port

Pin 17 (1W) is preferred. You can also connect multiple sensors in parallel using the same circuit.

SPI (MAX6675, MAX31725 and etc)

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
MOSI (if any) 2 (A7)
MISO (DO/SO) 3 (A6)
SCK (CLK) 5 (B3)
CS (SS) any free digital port

I²C

Sensor pin Flipper Zero pin
VCC 9 (3V3)
GND any GND (8,11 or 18)
SDA 15 (C1)
SCL 16 (C2)

Need help? Discussions?

Join the discussion, ask a question, or just send a photo of the flipper with sensors to Discord. Invite link

Contributing

You can write a driver for your favorite sensor and submit it in pull requests. This is encouraged.

Gratitudes

  • Special thanks xMasterX, vladin79, divinebird, jamisonderek, kaklik
  • Svaarich for the UI design
  • Unleashed firmware community for sensors testing and feedbacks
  • ...and everyone who helped with development and testing

List of supported sensors

| Model | Temperature range (accuracy, step)| Humidity range (accuracy, step)| Extra range

(accuracy, step)| Interface |Image and link | |:--------------------:|:-------------------------------:|:------------------------:|:---------------------------:|:-------------:|:--------------:| |AHT10 |-40...85°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.024%) | |I²C|| |AHT20 |-40...85°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.024%) | |I²C|| |AM2320 |-40...80°C (±0.5°C, 0.1°C) |0...100% (±3%, 0.1%) | |Single Wire/I²C|| |BME280 |-40...85°C (±1.0°C, 0.01°C) |0...100% (±3%, 0.008%) |300...1100 hPa (±1.0 hPa, 0.0016 hPa) |I²C|| |BME680 |-40...85°C (±0.5°C, 0.01°C) |0...100% (±3%, 0.008%) |300...1100 hPa (±0.6h Pa, 0.18 hPa) |I²C|| |BMP180 |-40...85°C (±0.5°C, 0.01°C) | |300...1100 hPa (±1.0 hPa, 0.01 hPa) |I²C|| |BMP280 |-40...85°C (±1.0°C, 0.01°C) | |300...1100 hPa (±1.0 hPa, 0.0016 hPa) |I²C|| |DHT11 (AOSONG) | 0...50°C (±2°C, 1.0°C) | 20...90% (±5%, 1.0%) | |Single Wire|| |DHT11 (ASAIR) | -20...60°C (±2°C, 0.1°C) | 5...95% (±5%, 1.0%) | |Single Wire|| |DHT12 | -20...60°C (±0.5°C, 0.1°C) | 20...90% (±5%, 0.1%) | |Single Wire|| |DHT20/AM2108 |-40...80°C (±0.5°C, 0.1°C) |0...100% (±3%, 0.1%) | |I²C|| |DHT21/AM2301 |-40...80°C (±1.0°C, 0.1°C) |0...100% (±3%, 0.1%) | |Single Wire|| |DHT22/AM2302 |-40...80°C (±0.5°C, 0.1°C) |0...100% (±2%, 0.1%) | |Single Wire|| |DS18B20 |-55...125°C (±0.5°C, 0.0625°C)| | |1-Wire|| |DS18S20 (DS1820) |-55...125°C (±0.5°C, 0.5°C) | | |1-Wire|| |DS1822 |-55...125°C (±2.0°C, 0.0625°C)| | |1-Wire|| |HDC1080 |-40...125°C (±0.2°C, 0.1°C) |0...100% (±2%, 0.1%) | |I²C|| |HDC2080 |-40...125°C (±0.2°C, 0.1°C) |0...100% (±2%, 0.1%) | |I²C|| |HTU21D(F) |-40...125°C (±0.3°C, 0.1°C) |0...100% (±2%, 0.04%) | |I²C|| |LM75 |-55...125°C (±2.0°C, 0.1°C) | | |I²C|| |MAX31725 |-40...105°C (±0.5°C, 0.004°C) | | |I²C|| |MAX31855 |-200...1800°C (±2.0°C, 0.25°C)| | |SPI|| |MAX6675 |0...1024°C (±9.0°C, 0.25°C) | | |SPI|| |SCD30 |0...50°C (±0.4°C, 0.01°C) |0...100% (±3%, 0.004%) |0...40000 ppm CO₂ (±30 ppm, 1.0 ppm) |I²C|| |SCD40 |-10...60°C (±0.8°C, 0.003°C) |0...100% (±6%, 0.002%) |400...2000 ppm CO₂ (±50 ppm, 1.0 ppm)|I²C|| |SCD41 |-10...60°C (±0.8°C, 0.003°C) |0...100% (±6%, 0.00%2) |400...5000 ppm CO₂ (±40 ppm, 1.0 ppm)|I²C|| |SHT20 |-40...125°C (±0.3°C, 0.01°C) |0...100% (±3%, 0.04%) | |I²C|| |SHT21 |-40...125°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.04%) | |I²C|| |SHT25 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.04%)| |I²C|| |SHT30/GXHT30 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±2%, 0.01%) | |I²C|| |SHT31/GXHT31 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±2%, 0.01%) | |I²C|| |SHT35/GXHT35 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.5%, 0.01%)| |I²C|| |SHT40 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.01%)| |I²C|| |SHT41 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.01%)| |I²C|| |SHT43 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±1.8%, 0.01%)| |I²C|| |SHT45 |-40...125°C (±0.1°C, 0.01°C) |0...100% (±1%, 0.01%) | |I²C|| |SHTC3 |-40...125°C (±0.2°C, 0.01°C) |0...100% (±2%, 0.01%) | |I²C|| |Si7021 |-40...125°C (±0.3°C, 0.01°C) |0...100% (±2%, 0.025%) | |I²C|| |TMP102 |-40...125°C (±0.5°C, 0.06°C) | | |I²C||

A comprehensive overview of the sensors can be found

Issues· 0 open

View all issuesOpen on GitHub

No open issues yet, or sync has not completed.

> Tags

Caht10am2320bme280bmp180

No comments yet. Be the first to share.

> Details

PublishedAug 1, 2026
UpdatedSep 17, 2026
Category编程语言
PricingOpen source

> Related tools

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言