Baike.dev
All toolsOnline toolsAI codingTrendingOpen sourceNewsSubmit
Log in
< Back to tools
P

PiTrac

> 编程语言
Open source

Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

398 stars0 likes0 views
WebsiteGitHub

About

Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

Introduction to PiTrac:

  • Introduction
    • Project Page
  • PiTrac - Start Here
  • PiTrac - Setup and Configuration
  • PiTrac - Licensing
  • PiTrac - Join the Discord

Introducing PiTrac

Introducing PiTrac - the world’s first (free!) open-source golf launch monitor (as far as we know).

PiTrac uses low-cost Raspberry Pi(*) computers and cameras to determine golf ball launch speed, angles and spin in three dimensions. PiTrac interfaces with both GSPro and E6/TruGolf simulators, and its output is also accessible on a stand-alone web-based app. [We’ve reached out to 2k/TopGolf, but no response yet.]

PiTrac uses off-the-shelf hardware, and includes a parts list with links to potential suppliers. The only custom part is a small printed circuit board. The fabrication instructions for that PCB are included in the open-source distribution and it can be manufactured for a few dollars. The two Pi computers and cameras are the most expensive parts, and cost around $250 in total.

PiTrac is not a commercial product for sale–the full design is being released as open source on GitHub for folks to build themselves. It’s not easy, but if you’re handy with a soldering iron, can figure out how to 3D print the parts, and are willing to burrow into the Linux operating system to compile and install software, you should be able to create your own PiTrac!

We are hoping that we can inspire a community of developers to help test and continue PiTrac’s development. This is a really immature project right now. The basic features usually work reliably, but the current release is a bit dodgy. We’re looking for folks to try building their own PiTracs and help us improve the documentation and design to make it easier for other people to do the same.

Project Page

Please visit our project page and also our YouTube channel here for more details and videos. The GitHub repository is in the works and already has the 3D printed part designs, the hardware design and initial software documentation. If you’re interested in more of the details and some of PiTrac’s development history, please look through the project logs.

Finally, any help at our support page would be appreciated to continue this work and complete the release process.

(*) Raspberry Pi is a trademark of Raspberry Pi Ltd. The PiTrac project is not endorsed, sponsored by or associated with Raspberry Pi or Raspberry Pi products or services.

Getting Started

The process of building your own PiTrac DIY Launch Monitor is described here at a high level. There are several more-detailed instruction documents elsewhere in the PiTrac repository that are referred to below for various sub-assemblies and tasks like compiling the code and preparing the build environment.

Setup and Configuration

The instructions which are targeted toward getting setup on a step-by-step basis. These instructions start with a Raspberry Pi with nothing on it, and are meant to describe all the steps to get from that point to a working, compiled version of PiTrac. A single RPi5 is currently our recommended path for everyone, however the path to stereoscopic vision may require two (if/when we head down that path).

Licensing

PiTrac is distributed under two separate licenses.

The software, documentation, and hardware designs are licensed under the GNU General Public License v2.0. See LICENSE.

PiTrac's trained machine-learning models are not covered by the GPL. They are licensed separately under LICENSE.MODEL.md, which sets out its own scope and terms. Read it before you use them.

For licensing questions, get in touch through https://github.com/PiTracLM.

Join the Discord

The PiTrac discord is where you can get help or show off your PiTrac build, discuss features and get to know other PiTrac builders. PiTrac is still a new project, so the Discord is a way to clear up any fuzzy parts of the initial ecosystem. Click the link above or copy this invite link in Discord: https://discord.gg/gMQcBBQYHT.

Issues· 21 open

View all issuesOpen on GitHub

No open issues yet, or sync has not completed.

> Tags

C++golfhacktoberfestlaunchlm

No comments yet. Be the first to share.

> Details

PublishedAug 1, 2026
UpdatedSep 17, 2026
Category编程语言
PricingOpen source

> Related tools

T
TypeScript
JavaScript 的超集,为前端与全栈提供静态类型
P
Python
通用编程语言,广泛用于 Web、数据与 AI
G
Go
Google 推出的简洁高效系统语言