[Request] Supporting multiple bed temperatures
Author: pmzandbergenCreated Nov 30, 2023Updated Sep 7, 2026
Labelsrequest
Is your feature request related to a problem? Please describe.
If I connect Octoprimnt to the new Snapmaker Artisan no bed temperature is shown.
Note: Originally requested in https://github.com/OctoPrint/OctoPrint/issues/4746 (closed)
Describe the solution you'd like
The Snapmaker Artisan delivers two bed temperatures. One for the inner zone and one for the outer zone. It would be great if Octoprint could handle this new feature with two temperture zones.
Describe alternatives you've considered
No response
Additional context
Recv: T0:210.90 /210.00 B0:59.95 /60.00 B1:36.43 /0.00 M:44.26 /0.00 T0:210.90 /210.00 T1:37.70 /0.00 @:0 B0@:127 B1@:0 @0:0 @1:0 @B_ZONE: CENTER
Recv: T0:210.40 /210.00 B0:59.92 /60.00 B1:36.53 /0.00 M:44.27 /0.00 T0:210.40 /210.00 T1:37.70 /0.00 @:127 B0@:127 B1@:0 @0:127 @1:0 @B_ZONE: CENTER
Recv: T0:209.60 /210.00 B0:60.00 /60.00 B1:36.39 /0.00 M:44.43 /0.00 T0:209.60 /210.00 T1:37.70 /0.00 @:127 B0@:0 B1@:0 @0:127 @1:0 @B_ZONE: CENTER
Recv: T0:209.10 /210.00 B0:59.90 /60.00 B1:36.43 /0.00 M:44.38 /0.00 T0:209.10 /210.00 T1:37.70 /0.00 @:127 B0@:127 B1@:0 @0:127 @1:0 @B_ZONE: CENTER
Recv: T0:210.10 /210.00 B0:60.00 /60.00 B1:36.43 /0.00 M:44.36 /0.00 T0:210.10 /210.00 T1:37.70 /0.00 @:0 B0@:0 B1@:0 @0:0 @1:0 @B_ZONE: CENTERThe interesting part is: B0:59.95 /60.00 B1:36.43 /0.00
B0 = inner bed (in this example set to heat to 60 degree), B1 = outer bed (in this example not set to heat)
Source: OctoPrint/OctoPrint