:airplane: Multi-functional, compatible DIY general aviation proximity awareness system
:airplane: Multi-functional, compatible DIY general aviation proximity awareness system
DIY, multi-functional, compatible, sub-1 GHz ISM band radio based proximity awareness system for general aviation.
| Type | Protocol | FLARM | OGN tracker | PilotAware | Skytraxx | SoftRF |
|---|---|---|---|---|---|---|
| Radio | FLARM AIR V7 |
||| 2 |
| OGNTP ||
||| 3
| P3I |||
|| 3
| FANET+ ||||
| 3
| 978 UAT ADS-B ||||| 4
| 1090 ES ADS-B ||| 5 || 5
| SRD 860 ADS-L ||
|||
| APRS ||||| 6
| Remote ID |||||
Data|FLARM NMEA|
|
|
||
|Garmin GDL90|||
||
| MAVLINK |
|
|||
| Dump1090 7 |||||
1 - it is necessary for a reader to distinguish the difference between statement "compatible" and statement "fully compatible".
SoftRF implements only a reasonable minimum of the protocols specs. No "bells and whistles" so far.
2 - FANET+ can not receive FLARM. However it is able to transmit it.
3 - valid for Prime Mark III , Prime Mark II , Dongle , Mini , Badge , Bracelet , Academy , Octave , Lego , Balkan , Midi , Eco , Card , Cozy , Handheld , Gizmo , Nano , Airventure , Solaris , Pocket , Labubu and Concorde Editions ; valid for Standalone , UAV and Uni Editions with optional DIY SoftRF LoRa RF module
4 - Reception of traffic 'downlink' frames only. Valid for Uni Edition alone and for Standalone Edition with optional DIY SoftRF UAT module
5 - Reception of traffic 'downlink' frames only. Valid for ES Edition
6 - APRS is the only available with Ham Edition
7 - also known as "raw ADS-B"
| Model(s) | Platform | First appearance | Status | Notes |
|---|---|---|---|---|
| 1 Prime | ||||
| 2 Standalone | ||||
| 3 UAV | ||||
| 4 WebTop Serial | [Espressif | |||
| ESP8266](https://en.wikipedia.org/wiki/ESP8266) | Q4 2015 | Prime model is no longer supported - use Prime MkII instead. |
1 Prime Mark II 2 Standalone + adapter 3 UAV 4 SkyView EZ 5 Flight Recorder|Espressif ESP32|Q1 2018||1 today's best platform ; 2 holds FCC mark 1 Raspberry Edition 2 SkyView Pi|Broadcom BCM283X (Raspberry Pi)|Q4 2018||Good for use together with RTL-SDR dongles to achieve additional 1090ES (and 978UAT) ADS-B air traffic reception. UAT module|Texas Instruments CC1310|Q1 2019||Unique RF radio specs are useful for UAT978 ADS-B reception [ 1 , 2 , 3 ] 1 [
No open issues yet, or sync has not completed.