Sonoff button SNZB-01P. Zigbee MQTT

What happened?

I’ve several buttons configured and running in automations with single, double or long press actions. Now I’ve bought a new one and when I try to edit the automations, I cannot see the 3 actions class.

What did you expect to happen?

To see the three types of actions

How to reproduce it (minimal and precise)

I’ve tried with my existing buttons configured and a new one.

Zigbee2MQTT version

2.14.1 (unknown)

Adapter firmware version

{"build":0,"ezsp":13,"major":7,"minor":4,"patch":4,"revision":"7.4.4 [GA]","special":0,"type":170}

Adapter

EmberZNet

Setup

os: #1 SMP PREEMPT_DYNAMIC Thu Jul 30 12:31:10 UTC 2026 - 6.18.39-haos - x64 node: v24.18.1 ha: true

Device database.db entry

No response

Debug log

No response

Notes

Device

definition: SNZB-01P - SONOFF (v0.0.0) software_build_id: 2.2.0 date_code: 20230908 endpoints:

{"1":{"bindings":[{"cluster":"genPollCtrl","target":{"endpoint":1,"ieee_address":"0x24d660fffea3ae2d","type":"endpoint"}},{"cluster":"genOnOff","target":{"endpoint":1,"ieee_address":"0x24d660fffea3ae2d","type":"endpoint"}},{"cluster":"genPowerCfg","target":{"endpoint":1,"ieee_address":"0x24d660fffea3ae2d","type":"endpoint"}}],"clusters":{"input":["genBasic","genPowerCfg","genIdentify","genPollCtrl","manuSpecificAmazonWWAH"],"output":["genIdentify","genOnOff","genOta"]},"configured_reportings":[{"attribute":"batteryPercentageRemaining","cluster":"genPowerCfg","maximum_report_interval":7200,"minimum_report_interval":3600,"reportable_change":0},{"attribute":"batteryVoltage","cluster":"genPowerCfg","maximum_report_interval":7200,"minimum_report_interval":3600,"reportable_change":0}],"scenes":[]}}

Health

time: Thu Sep 17 2026 21:13:14 GMT 0200 (hora de verano de Europa central) os.load_average: 0.28, 0.2, 0.17 os.memory_percent: 79.1745 process.memory_percent: 5.9835 process.uptime_sec: 127227

{"leave_count":0,"messages":25,"messages_per_sec":0.0002,"network_address_changes":0}