mobiledevice

日本語はこちら

mobiledevice

mobiledevice is a command line utility for interacting with Apple's Private Mobile Device Framework. It can be used for automating some tasks like installing and uninstalling apps on your iPhone/iPad without having to manually do it via Xcode or iTunes. You don't need a jailbroken device!

Requirements

• iPhone 3G and above should work / iPad too (tested on iPhone 4, 5, 6).
• Plug in your iPhone/iPad to your Mac via USB.
• In order to install apps on the device, you need the iOS development certificates previously installed.
• Mac OS X 10.6 and above.
• XCode 3 or above with iOS SDK installed.
• You need to compile the tool and optionally install it.

Installation

Homebrew

If you use homebrew, you can install mobiledevice by executing:

brew update
brew install mobiledevice

Manual

To compile mobiledevice, open a terminal console and type:

git clone git://github.com/imkira/mobiledevice.git
cd mobiledevice
make

To install mobiledevice in your system, proceed with:

make install

Usage

Help

After compiling/installing mobiledevice, open a terminal console.

For the usage screen, you can type

mobiledevice help

and the following will be displayed:

…

On failure, all commands exit with status code set to a non-zero value, and some print messages to stderr indicating the kind of error.

On success, all commands exit with status code set to 0.

List devices

To list all connected devices, you can type

mobiledevice list_devices

And all devices will be listed by UDID like the following:

aaf4c61ddcc5e8a2dabede0f3b482cd9aea9434d
7c211433f02071597741e6ff5a8ea34789abbf43
0ab8318acaf6e678dd02e2b5c343ed41111b393d

In the previous example, there are 3 connected devices. If you want to limit the number of results you can pass the -n flag as follows:

mobiledevice list_devices -n 1

The output will be, as expected, trimmed to one device.

aaf4c61ddcc5e8a2dabede0f3b482cd9aea9434d

List device properties

To list all properties about a device, you can type:

mobiledevice list_device_props

The output should be something like:

ActivationPublicKey
ActivationState
ActivationStateAcknowledged
BasebandSerialNumber
BasebandStatus
BasebandVersion
BluetoothAddress
BuildVersion
CPUArchitecture
DeviceCertificate
DeviceClass
DeviceColor
DeviceName
DevicePublicKey
DieID
...

To specify a different device, you can also append the -u flag as follows:

mobiledevice list_device_props -u 7c211433f02071597741e6ff5a8ea34789abbf43

Notes:

• If -u is not provided, the first detect device will be used.

Get device property value

To display the value of a device property with a given name, you can type:

mobiledevice get_device_prop property_name

For example to get information on the product type of the device, you can use ProductType as property name:

mobiledevice get_device_prop ProductType

To specify a different device, you can also append the -u flag as follows:

mobiledevice get_device_prop -u 7c211433f02071597741e6ff5a8ea34789abbf43
property_name

Notes:

• If -u is not provided, the first detect device will be used.
• On successful execution, the output consists of the value followed by a newline character.

List applications

To get the list of installed apps, type:

mobiledevice list_apps

The output should be something like:

com.apple.VoiceMemos
com.apple.mobiletimer
com.apple.AdSheetPhone
com.apple.weather
com.apple.iphoneos.iPodOut
com.apple.mobilesafari
com.apple.Preferences
...
com.mycompany.myapp1
com.mycompany.myapp2
...

To specify a different device, you can also append the -u flag as follows:

mobiledevice list_apps -u 7c211433f02071597741e6ff5a8ea34789abbf43

Notes:

• If -u is not provided, the first detect device will be used.

List application properties

To display the value of a device property with a given name, you can type:

mobiledevice list_app_props com.mycompany.myapp

The output should be something like:

SBIconClass
CFBundleInfoDictionaryVersion
Entitlements
DTPlatformVersion
CFBundleName
DTSDKName
ApplicationType
UIViewControllerBasedStatusBarAppearance
CFBundleIcons
UIStatusBarStyle
Container
LSRequiresIPhoneOS
CFBundleDisplayName
PrivateURLSchemes
UIBackgroundModes
DTSDKBuild
...

To specify a different device, you can also append the -u flag as follows:

mobiledevice list_app_props -u 7c211433f02071597741e6ff5a8ea34789abbf43 com.mycompany.myapp

Notes:

• If -u is not provided, the first detect device will be used.

Get application property value

To display the value of an application property with a given name, you can type:

mobiledevice get_app_prop com.mycompany.myapp property_name

For example to get the path where Apple's Weather app is installed on the device, you can use Path as property name:

mobiledevice get_app_prop com.apple.weather Path

To specify a different device, you can also append the -u flag as follows:

mobiledevice get_app_prop -u 7c211433f02071597741e6ff5a8ea34789abbf43 com.mycompany.myapp Path

Notes:

• If -u is not provided, the first detect device will be used.
• On successful execution, the output consists of the value followed by a newline character.

Install application

To install an app on the device, you can type:

mobiledevice install_app path/to/my_application.app

To specify a different device, you can also append the -u flag as follows:

mobiledevice install_app -u 7c211433f02071597741e6ff5a8ea34789abbf43 path/to/my_application.app

Notes:

• If -u is not provided, the first detect device will be used.

Uninstall application

To uninstall an app from the device, pass in the bundle identifier and type:

mobiledevice uninstall_app com.mycompany.myapp

To specify a different device, you can also append the -u flag as follows:

mobiledevice uninstall_app -u 7c211433f02071597741e6ff5a8ea34789abbf43 com.mycompany.myapp

Notes:

• If -u is not provided, the first detect device will be used.

Forward (tunnel) TCP connections from Mac to the device

If your app creates a TCP server by listening on some port, it may be useful to connect to it via USB (no need for WiFi/3G connection). mobiledevice allows you to create a tunnel between your Mac and your device, via a USB cable. If you connect to your Mac (on localhost or 127.0.0.1) mobiledevice will forward that connection to the device on the specified port by typing something like:

mobiledevice tunnel 8080 80

The previous example attempts to illustrate a tunnel between your Mac's TCP port 8080 and the device's TCP port 80. The output would be something like:

Tunneling from local port 8080 to device port 80...

From this point you can telnet localhost 8080 and communicate with the server running at TCP port 80 on the mobile app!

To specify a different device, you can also append the -u flag as follows:

mobiledevice tunnel -u 7c211433f02071597741e6ff5a8ea34789abbf43 8080 80

Notes:

• If -u is not provided, the first detect device will be used.
• Please note that if you keep the process open, it will keep forwarding connections. If and when you decide to terminate it (for instance, by pressing CTRL-C), it will terminate all currently tunnelled connections and stop accepting more connections to it.
• Also note that mobiledevice allows you to keep multiple connections open to the same TCP port on the device (by running a single instance of mobiledevice), or to different ports (by running multiple instances of mobiledevice and specifying the ports for each).

Get the bundle identifier of an application

This is just an utility command, and is not related to the MobileDevice Framework. To get the bundle identifier (e.g. com.mycompany.myapp) of an .app you can type the following command (bear in mind it must be a valid .app folder, not a .ipa!):

mobiledevice get_bundle_id path/to/my_application.app

Notes:

• Please note that the previous path is on your local computer, not a path to the device.

Contribute

Found a bug? Want to contribute and add a new feature?

Please fork this project and send me a pull request!

Contributors

• ruudputs: Added initial support for multiple devices.
• leopatras: Simplified obj-c string-related code and adoption of ARC.
• 7bp: Fixed compilation issues.
• k-yamada: Fixed usage screen typos.

You can check the full list here.

License

mobiledevice is licensed under the MIT license:

www.opensource.org/licenses/MIT