Zigbee H&T sensors reporting 2 decimals precision after HA update

The problem

Today, I updated my Home Assistant to 2025.5.3, and after that I noticed that several Zigbee temperature and humidity sensors suddenly report their measurements with 2 decimals of precision. For example, before the update the sensor reported my living room to be at 20,3 °C, but after the update it reports 20,47 °C.

While nothing is broken per se, it does strike as odd, since I wasn't even aware these devices were capable of measuring with such precision. I actually don't think they are, perhaps they work in F internally and a conversion from F to °C is returning 2 decimals whereas it was 1 decimal before.

What version of Home Assistant Core has the issue?

core 2025.5.3

What was the last working version of Home Assistant Core?

2025.4.3

What type of installation are you running?

Home Assistant OS

Integration causing the issue

Zigbee Home Automation

Link to integration documentation on our website

https://www.home-assistant.io/integrations/zha

Diagnostics information

No response

Example YAML snippet

n/a

Anything in the logs that might be useful for us?

Nothing about ZHA or Zigbee in the logs.

Additional information

I use ZHA as integration and I have a Nabu Casa SkyConnect v1.0 coordinator.

I have several of the same sensors, they are shown as "RH3052 by TUYATEC-qun7vq14", and I also have a few others, these are shown as "lumi.weather by LUMI", all of these exhibit the same behavior.