doesn't work: The termshark UI will start when packets are detected on eth0...

Prerequisites

Please verify these before submitting an issue.

• I am running the latest versions of Termshark and Wireshark.
• I checked the README and User Guide and found no answer
• I searched issues and this has not yet been filed

Problem

Doesn't work.

Current Behavior

# termshark
(The termshark UI will start when packets are detected on eth0...)

Please describe the behavior you are seeing.

Expected Behavior

UI should start, eth0 is the main interface with a lot of packets.

Please describe the behavior you are expecting.

Screenshots as applicable

• Provide screenshots of wireshark/tshark if that's what the expectation is based on.
• Provide screenshots of the problem state.

Steps to Reproduce

1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error

Context

Please provide the complete output of these commands:

• termshark -v (or termshark -vv if running from git/HEAD)
• termshark -v | cat

# termshark -vv 
termshark 2.4.0
using tshark 4.0.2 (from /usr/bin/tshark)

Please also provide any relevant information about your environment (OS, VM, pi,...) debian sid