AutoHotInterception

AutoHotInterception

AutoHotInterception (AHI) allows you to execute AutoHotkey code in response to events from a specific keyboard or mouse, whilst (optionally) blocking the native functionality (i.e. stopping Windows from seeing that keyboard or mouse event).
In other words, you can use a key on a second (or third, or fourth...) keyboard to trigger AHK code, and that key will not be seen by applications. You can use the same key on multiple keyboards for individual actions.
For example, you could have 3 keyboards connected, and on the 1st (Main keyboard), no changes are applied, but on keyboard #2, when you press F1, it replaces it with a, and on keyboard #3, when you press F1, it replaces it with b.
Keyboard Keys, Mouse Buttons and Mouse movement (Both Relative and Absolute modes) are supported.
Both AHK v1 and AHK v2 are supported.

AHI uses the Interception driver by Francisco Lopez

Getting Help

AHI Discussion Thread on the AHK forums

Discord Channel

WARNING

TAKE CARE when using this code. Because Interception is a driver, and sits below windows proper, blocking with Interception goes so deep that it can even block CTRL+ALT+DEL etc. As such, it is entirely possible to lock up all input, or at least make life a little difficult.
In general, worst-case scenario would require use of the reset button.
For example, using Subscription Mode with block enabled will totally block that key from working on that keyboard. So if you block Ctrl on your only keyboard, you just blocked CTRL+ALT+DEL.
The best insurance policy is to have another keyboard or mouse handy, one that you don't block.
Be wary of making scripts using this code run on startup. Know how to enter "Safe Mode" in windows and disable startup of the scripts. Know mouse alternatives to emergency keyboard actions (Right click on clock for Task Manager!)
As they say - With great power comes great responsibility.
If this all scares you and you don't really understand it, then TL/DR is you should probably stick to "Context Mode", it's safer.

Device IDs / VIDs PIDs etc

Interception identifies unique devices by an ID. This is a number from 1..20.
Devices 1-10 are always keyboards
Devices 11-20 are always mice
This ID scheme is totally unique to Interception, and IDs may change as you plug / unplug devices etc.
On PC, devices are often identified by VendorID (VID) and ProductID (PID). These are identifiers baked into the hardware at time of manufacture, and are identical for all devices of the same make / model.
Most AHI functions (eg to Subscribe to a key etc) use an Interception ID, so some handy functions are provided to allow you to find the (current) Interception ID of your device, given a VID / PID.
If you are unsure of what the VID / PID of your device is (or even if Interception can see it), you can use the included Monitor script to find it.

You will need to know the VID / PID of at least one of your devices in order to do anything with AHI.

Monitor App

This handy tool allows you to check if AHI is working, and also to find the VID/PID or DeviceHandle of your devices.
You can use the handy "Copy" buttons to copy the VID/PID or DeviceHandle of the device to the clipboard.
When using the monitor app, DO NOT tick all devices at once, as if it crashes, it will lock up all devices. Instead, tick one at a time and see if it your device.

Known Issues

If you unplug / replug a device, or go into hibernate and resume, the Interception ID of a device will increase by 1.
If the ID of a device goes above 10 (For keyboards) or 20 (For Mice), The device will completely cease to function until the next reboot - not only in AutoHotInterception, but in Windows also.
There is nothing I can do to fix this issue, it is a limitation of the Interception driver

Setup

Install the Intereception driver

Download and install the Interception Driver
Note that you must run install-interception.exe at an admin command prompt (Not double-click it) - once you do so, it will instruct you to execute install-interception.exe /install to actually perform the install.
Here is a GIF showing the process:

Build your AutoHotInterception folder

1. Download an AHI release from the releases page and extract it to a folder.
   DO NOT use the "Clone or Download" link on the main page.
2. From the AHI release zip, extract EITHER the AHK v1 folder OR the AHK v2 folder to somewhere on your disk.
   This is the "working folder" where (at least initially) you will be running scripts from.
   It contains a number of sample .ahk scripts and a lib folder.
3. From the AHI release zip, extract AutoHotInterception.dll from the Common\lib folder and place it into lib in your "working folder"
4. In the Interception installer zip, there is a library folder containing x86 and x64 folders.
   Copy both of these folders into the lib folder in your "working folder".

Example for AHK v1 - the "working folder" is on the left, top right is the AutoHotInterception zip, bottom right is the Interception zip.

The folder structure should end up looking like:

AHI Root Folder
	Monitor.ahk
	etc...
	Lib
		AutoHotInterception.ahk
		AutoHotInterception.dll
		CLR.ahk
		Unblocker.ps1
		etc..
		x86
			interception.dll
		x64
			interception.dll

1. Right-click Unblocker.ps1 in the lib folder and select Run as Admin.
   This is because downloaded DLLs are often blocked and will not work.
   Alternatively, this can be done manually in one of two ways:
   1. By right clicking the DLLs, selecting Properties, and checking a "Block" box if it exists.
   2. Before you open any zip (ie the AutoHotInterception zip or the Interception zip), right click it and select "Unblock".
2. Run Monitor.ahk from your working folder to check that everything works
3. (Optional) The contents of the lib folder can actually be placed in one of the AutoHotkey lib folders (eg My Documents\AutoHotkey\lib - make it if it does not exist), and the #include lines of the sample scripts changed to #include , to enable your AHI scripts to be in any folder, without each needing it's own copy of the library files.

Usage

Initializing the Library

AHK v1

Include the library

#Persistent ; (Interception hotkeys do not stop AHK from exiting, so use this)
#include Lib\AutoHotInterception.ahk

Initialize the library

global AHI := new AutoHotInterception()

AHK v2

Include the library

Persistent ; (Interception hotkeys do not stop AHK from exiting, so use this)
#include Lib\AutoHotInterception.ahk

Initialize the library

global AHI := AutoHotInterception()

Note
The AHI variable is an AHK class that makes it easy to interact with the AutoHotInterception DLL (Which itself then interacts with the Interception dll). For example, it wraps GetDeviceList() to make it return a normal AHK array. Most of the time you will not need it.
For advanced users, if you wish to directly communicate with the AHI DLL (eg for best possible performance), you can call AHI.Instance instead of AHI for most functions (eg when sending of synthesized input using SendMouseMove).

AHI := new AutoHotInterception()
AHI.Instance.SendMouseMove(...)

Misc Commands

SetState

SetState(true|false)
Turns on or off all subscriptions (Starts on)
Where true is on, false is off.
eg AHI.SetState(false)

Finding Device IDs

USB Devices

In most cases, you will want to hard-wire a script to a specific VID/PID - in this instance, use one of the following methods.
For all these methods, if you have multiple identical VID/PID devices, you can specify an instance (Starts from 1).

GetDeviceId

AHI.GetDeviceId(, , [,] )
Where isMouse is true if you wish to find a mouse, or false if you wish to find a keyboard.
eg AHI.GetDeviceId(false, 0x04F2, 0x0112) to find a keyboard with VID 0x04F2 and PID 0x0112

GetKeyboardId

AHI.GetKeyboardId(, [,] )

GetMouseId

AHI.GetMouseId(, [,] )

PS/2 and other Legacy devices (Can also apply to Laptops)

Some devices (eg older machines with PS/2 interfaces, or some laptops) may not use USB, so these will not have a VID and PID.
In this case, use the monitor app (Or GetDeviceList()) to findle out the "Handle" of your device, and get it's ID from that.

GetDeviceIdFromHandle

AHI.GetDeviceIdFromHandle(, [,] )
This works in the same way as GetDeviceId above, except you pass a string containing the handle.
eg AHI.GetDeviceIdFromHandle(false, "ACPI\PNP0303") to find a keyboard with the handle ACPI\PNP0303

GetKeyboardIdFromHandle

AHI.GetKeyboardIdFromHandle( [,] )

GetMouseIdFromHandle

AHI.GetMouseIdFromHandle( [,] )

Getting a list of devices

If you wish to get a list of all available devices, you can call AHI.GetDeviceList(), which will return an array of DeviceInfo objects, each of which has the following properties:

Id
isMouse
Vid
Pid
Handle

Input Detection

AHI has two input detection modes - Context Mode and Subscription Mode, and both can be used simultaneously.

Context mode

Context mode is so named as it takes advantage of AutoHotkey's Context Sensitive Hotkeys.
As such, only Keyboard Keys and Mouse Buttons are supported in this mode. Mouse Movement is not supported.

In context mode, you create a Context Manager object which turns on/off a set of AHK hotkeys for you.
You wrap your hotkeys in an #if block which is controlled by the manager.

Create a Context Manager for the keyboard or mouse, pass it the Interception ID of the device.
Then Create your hotkeys, wrapped in an #if block that checks the .IsActive property of your Context Manager

(Complete, working script)

AHK v1

#include Lib\AutoHotInterception.ahk

AHI := new AutoHotInterception()
keyboard1Id := AHI.GetKeyboardId(0x04F2, 0x0112)
cm1 := AHI.CreateContextManager(keyboard1Id)

#if cm1.IsActive	; Start the #if block
::aaa::JACKPOT
1:: 
	ToolTip % "KEY DOWN EVENT @ " A_TickCount
	return
	
1 up::
	ToolTip % "KEY UP EVENT @ " A_TickCount
	return
#if			; Close the #if block

AHK v2

#include Lib\AutoHotInterception.ahk

AHI := AutoHotInterception()
keyboard1Id := AHI.GetKeyboardId(0x04F2, 0x0112)
cm1 := AHI.CreateContextManager(keyboard1Id)

#HotIf cm1.IsActive	; Start the #if block
::aaa::JACKPOT
1::
{
	ToolTip("KEY DOWN EVENT @ " A_TickCount)
	return
}
	
1 up::
{
	ToolTip("KEY UP EVENT @ " A_TickCount)
	return
}
#HotIf			; Close the #if block

You can remove a Context Manager using AHI.RemoveContextManager(keyboard1Id)

Subscription mode

In Subscription mode, you bypass AHK's hotkey system completely, and Interception notifies you of key events via callbacks.
All forms of input are supported in Subscription Mode.
Subscription Mode overrides Context Mode - that is, if a key on a keyboard has been subscribed to with Subscription Mode, then Context Mode will not fire for that key on that keyboard.
SubscribeKey overrides SubscribeKeyboard - that is, if you have subscribed to all keys and a specific key on the same keyboard, then if you press the specific key, it's callback will fire and the callback for SubscribeKeyboard will not.
Each Subscribe endpoint also has a corresponding Unsubscribe endpoint, which removes the subscription and any block associated with it.
Both keyboard and mouse subscription functions have an optional concurrent parameter. This controls whether callbacks are fired sequentially or not.
Fals