A small desk-calendar, portal-themend. It display the current date, the next few events in your calendar and whether a person in your contact list has a birthda
A small desk-calendar, portal-themend. It display the current date, the next few events in your calendar and whether a person in your contact list has a birthda
Portal eInk Calendar
A small desk-calendar with the theme of a portal chamber info.
It displays the current date, the next few events in your calendar and whether a person in your contact list has a birthday (inc. their name).Table of Contents
About The ProjectComponents
Getting StartedPrerequisites
Installation
Frame
Questions
Contact
Acknowledgments
The finished project on my desk:
The pie is displayed when a person in your contacts has a birthday (along with the name below it). The other three icons are currently displayed randomly.
(back to top)
This repo includes the software (100% python) and the STLs of the frame.
I used the following hardware:
(back to top)
The prerequisites are based on this waveshare instruction to get your rapi ready for the display:
sudo raspi-config
# Choose Interfacing Options -> SPI -> Yes to enable SPI interfacewget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.60.tar.gz
tar zxvf bcm2835-1.60.tar.gz
cd bcm2835-1.60/
sudo ./configure
sudo make
sudo make check
sudo make installsudo apt-get install wiringpi
#For Pi 4, you need to update it:
cd /tmp
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.debClone the repo
git clone https://github.com/13Bytes/eInkCalendar
cd eInkCalendarInstall requirements
sudo apt-get update
# requirements by waveshare
sudo apt-get install python3-pip python3-pil python3-numpy RPi.GPIO python-spidev
# requirements by this repo
sudo python3 -m pip install -r requirements.txtCreate config-file
cp settings.py.sample settings.pyNow edit settings.py and set all your settings:
LOCALE: "en_US" (or e.g. en-GB.UTF-8) Select your desired format and language.
It needs to be installed on your device (which 95% of time is already the case - as it's you system-language.
You can list all installed local-packages with locale -a.
If the desired one is missing, add it in this menu sudo dpkg-reconfigure locales (for Raspberry Pis) or take a look at the general Debian Wiki).
WEBDAV_CALENDAR_URL = "webcal://p32-caldav.icloud.com/published/2/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" The address of your shared wabdav calendar. (It needs to be publicly accessible by this URL)
WEBDAV_IS_APPLE = True Is the calendar hosted on icloud?
CALDAV_CONTACT_USER = "louis" Username for logging into your CALDAV contact-list.
CALDAV_CONTACT_PWD = "secret" Password for logging into your CALDAV contact-list.
ROTATE_IMAGE = True This will rotate the image 180° before printing it to the calendar. True is required if you use my STL, as the dipay is mounted upside-down.
Add the start-script to your boot-process:
(You might need to adapt the path /home/pi/eInkCalendar/run_calendar.sh acordingly)
Make run_calendar.sh executable
chmod +x /home/pi/eInkCalendar/run_calendar.shand add it to crontab, as follows:
crontab -eand add following line:@reboot sleep 60 && /home/pi/eInkCalendar/run_calendar.sh
(back to top)
The STLs of the frame can be found in hardware. It's designed for 3D-printing. The two parts can be screwed together in three of the four corners.
The raspi is held in place by threaded heat set inserts.
(back to top)
Stuck somewhere?
You can contact me, or create a issue.
(back to top)
Louis - @Louis_D_ - [email protected]
(back to top)
(back to top)
No open issues yet, or sync has not completed.